Motogadget LED handlebar end indicator m-Blaze black left

Description

Product Description: Motogadget LED Handlebar End Indicator m-Blaze Ø35mm

The Motogadget LED Handlebar End Indicator m-Blaze Ø35mm combines innovative LED technology with stylish design for your motorcycle. It offers extremely bright light and perfectly complements the handlebar. With E-mark and easy installation, a must-have for every biker.

• High-Quality Handlebar Weights: The Motogadget LED Handlebar End Indicators m-Blaze Ø35mm are almost invisible when turned off and add elegant accents to the handlebar.
• IntensiLED® Technology: The modern high-performance LED technology provides extremely bright light that is clearly visible both forward and backward.
• Secure Attachment: The clamp rubber at the handlebar end ensures the indicator is securely and firmly mounted, suitable for handlebars with an inner diameter of 14-21 mm.
• Dimensions and Weight: With a diameter of 35 mm and a length of 68 mm, the indicators are compact and lightweight, weighing only 40 g.
• Electronic Voltage Preparation: The integrated electronics ensure reliable function and protection, even with varying voltage conditions.

Detailed Product Description:

Motogadget LED Handlebar End Indicator m-Blaze

High-quality handlebar weight with integrated LED indicator.

Details:

• barely noticeable on the handlebar when turned off
• extremely bright light forward
• clearly visible light backward
• state-of-the-art high-performance LED technology IntensiLED®
• electronic voltage preparation and secure protective electronics
• indicator control light can be omitted if the indicator is within the field of view
• harmoniously closes the handlebar end
• securely and firmly attached by clamp rubber at the handlebar end
• suitable for almost all handlebars with an inner diameter of 14-21 mm
• 12 volts, 7 watts

Dimensions (approx.):
Diameter: 35 mm
Total length overall: 68 mm
Partial length outside the handlebar: 20 mm
Partial length inside the handlebar: 48 mm
Cable length: 100 cm
Weight: 40 g

ATTENTION:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flashing frequency to an acceptable level.

Approval:
With E-mark for the front.
The indicators have an E-mark and do not require additional paperwork.
They can be installed without further ado, according to installation regulations.

For motorcycles with E-approval (from around mid/late 90s) the following apply:
permissible installation height: 350 to 1200 mm
geometric visibility inward/outward: 20/80 degrees - please pay attention to the handlebar's backward curvature!
geometric visibility upward and downward: 15 degrees - please pay attention to the handlebar's upward or downward curvature!
permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles individually approved, or non-EU countries, different measurements may apply.

Price per piece