Kellermann LED flasher/marker light micro 1000 Rhombus PL right chrome

Description

Product Description: Kellermann LED Indicator/Position Light M8 micro 1000 Rhombus PL

Experience maximum visibility with the Kellermann LED Indicator/Position Light M8 micro 1000 Rhombus PL. Robust design meets innovative lighting technology. Perfect for your motorcycle.

• Robust Metal Housing: The metal housing of the Kellermann LED Indicator/Position Light M8 micro 1000 Rhombus PL offers exceptional durability and protection against external influences.
• Integrated Position Light: Ensures increased visibility in traffic. The combination of indicator and position light guarantees safety on every ride.
• High-Performance LEDs: State-of-the-art technology enhances visibility and provides a clear signal, even in challenging lighting conditions.
• Vibration-Damping Rubber Base: Minimizes vibrations and ensures a secure fit. Perfect for easy installation and lasting stability.
• Suitable for 6 and 12 Volts: Flexibly usable for various motorcycle systems. The intelligent control allows operation on most electrical systems.
• Kellermann HighPower LED Technology: Guarantees long lifespan and consistent performance, keeping you safe at all times.

Detailed Product Description:

Kellermann Polo LED Indicator/Position Light M8 micro 1000 Rhombus PL

Very high-quality universal turn signal in a robust metal housing with integrated position light.

Details:

• The proven micro 1000 LED in its PL variant incorporates a very bright position light alongside the indicator
• The integrated position light significantly improves visibility during the ride
• Thanks to the latest high-performance LEDs and specially developed control technology, the micro 1000 PL ensures better visibility in traffic
• Mounting via M8x1.25 thread and nut
• Vibration-damping rubber base
• Two bright SMDs ensure excellent visibility in operation
• Kellermann HighPower LED Technology
• Long Life Protection Guard®, IC controlled, clocked at 330 kHz
• Suitable for 6 and 12 Volt electrical systems, 1/1 Watt (indicator/position light)
• Made in Germany

Dimensions (approx.):
Width without thread x Height x Depth: 78 x 21 x 24 mm
Width x Height of glass: 50 x 18 mm
Diameter at base: 15 mm
Thread length: 20 mm
Nut wrench size: 13 mm
Cable length: 300 mm
Weight: 50 g

Cable Assignment:
gray = Indicator (+)
gray/white = Position light (+)
black = Ground (-)

ATTENTION:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Options:

• The toggle switch module allows the position light to turn off while the indicator is activated to increase its clear visibility (Order number 50220000650)
• With the adjustable resistor, usage is possible with almost all models with CAN-BUS without issues (Order number 50220000640)
• Depending on the model, suitable Kellermann resistors for adjusting the flash frequency (Order number 60490000990 or 60490000630)
• Depending on the model, suitable load-independent Kellermann flasher relays (Order number 60490001061 or 60490001060)
• If the legal distances cannot be maintained or something is simply in the way, additional necessary suitable extensions for the indicator arm can be used (Order No. 60490100050)
• For easier connection without modifications to the original indicator cables, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• If the installation is to take place instead of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which the installation is then possible without problems (Order No. 50170100000 and following)

Approval:
With E-mark for the front.
The indicators and position lights have an E-mark and do not require further documentation.
They can therefore be installed without further ado, in accordance with installation regulations.

For motorcycles with E-approval (from around mid/end of the 1990s) the following apply:
Minimum distance from indicator glass to indicator glass at the front: 240 mm
Minimum distance from indicator glass to headlight glass: 75 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inwards/outwards: 20/80 degrees
Geometric visibility upwards and downwards: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles approved individually, or those outside the EU, different measurements may apply.

Price per piece