Highsider LED indicator/navigationlight pair Proton Three selfadhesive

Description

Product Description: Highsider LED Indicator/Position Light Pair Proton Three Self-Adhesive

The Highsider LED Indicator/Position Light Pair Proton Three Self-Adhesive offers maximum flexibility and visibility. Thanks to easy installation, it enhances your safety and perfectly adapts to your motorcycle.

• Universal Installation: The self-adhesive LED lights can be attached to fairings, mirrors, or handlebar ends. No drilling required, making installation a breeze.
• Increased Visibility: The integrated position light ensures better visibility in darkness and poor weather conditions by optimally illuminating the vehicle's surroundings.
• Robust Design: The metal housing with tinted plastic glass provides protection against external influences and gives your motorcycle a modern look.
• Compact Dimensions: With a width of 12mm, height of 12.5mm, and length of 22mm, the lights are unobtrusive and seamlessly integrate into the design of your motorcycle.
• Easy Installation: The 36cm long cables with 3.5mm round plug connectors allow for easy integration into the existing system without extensive modifications.

Detailed Product Description:

Highsider LED Indicator/Position Light Pair Proton Three Self-Adhesive

Universal small direction indicators with integrated position light for sticking onto fairings, mirrors, handlebar ends, etc.

Details:

• the integrated position light ensures significantly better visibility during driving 
• robust metal housing with tinted plastic glass
• can be adhered anywhere thanks to the included adhesive pads 
• only a small outlet for the cables is necessary at the location
• 12 volts, 3.6/1.5 watts, 0.25/0.09A (indicator/position light)

Dimensions (approx.):
Width without adhesive pad x Height x Length: 12 x 12.5 x 22 mm
Glass diameter: 11 mm
Cable length: 36 cm
Ø Round plug connectors: 3.5 mm
Weight: 20 g each

Cable Assignment:
yellow = indicator (+)
white = position light (+)
black = ground (-)

CAUTION:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an allowable level.

Options:

• with the adjustable resistor, usage is possible even with almost all models with CAN-BUS (Order number 50220000640)
• the toggle switch module allows the position light to turn off while the indicator is activated to increase its clear visibility (Order number 50220000650)
• for easier connection without changes to the original indicator cables, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following  as well as 50170502000 and following)
• also available as a pure indicator (Order number 50170401280)
• also available as an indicator with integrated tail light (Order number 50160301630)
• also available as a pure position light (Order number 60290004550)

Approval:
With E-mark for the front.
The indicators and position lights have an E-mark and do not require any additional paperwork.
They can therefore be installed without further ado, in accordance with the installation regulations.

For motorcycles with E-approval (from around the mid/late 90s):
Minimum distance from indicator glass to indicator glass at the front: 240 mm
Minimum distance from indicator glass to headlight glass: 75 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility up and down: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles individually approved for traffic, or in non-EU countries, different measurements may apply.

Price per pair