Koso heated grips with integrated switch for 22mm 5-steps 130mm

Description

Product Description: Koso Heated Grips with Integrated Switch for 22mm 5-Stage

Enjoy warm hands without disturbing switch units. With the Koso heated grips, which have an integrated switch for 22mm handlebars, you will experience comfort at the highest level. The heating level display is directly integrated into the grip.

• Integrated Switch The switch for the heating power is built into the left grip, providing you with a sleek and unobstructed handlebar appearance.
• Universal Fit Perfect for all motorcycles with 22mm handlebar outer diameter, these heated grips are compatible with a throttle grip.
• 5-Stage Heating Control Adjust the heating power to the outside temperatures. All settings are made visible through color display directly on the grip.
• Open Ends This feature allows for use with handlebar ends, including end caps for versatile adaptation.
• Easy Installation With only two cables (+/-), the heated grips can be easily connected to the vehicle's electrical system, ideally via the main headlight connector.
• Practical Dimensions The grip lengths vary between 120 mm and 130 mm, while the grip surface is 100 mm or 110 mm wide, for optimal grip and comfort.

Detailed Product Description:

Koso Heated Grips with Integrated Switch for 22mm 5-Stage

No more cold fingers, but without a bulky switch unit that has to be awkwardly mounted somewhere and disturbs the appearance?
These heated grips have the switch and the heating level display integrated into the left grip!

Details:

• Suitable for all models with a 22mm outer diameter handlebar and throttle grip
• The heating power can be adjusted 5-fold to the needs or outside temperatures via the button on the left grip
• The set heating level is also displayed on the left grip via color
• No more cold, stiff fingers and the associated lack of concentration
• Often makes wearing thick gloves unnecessary, which is beneficial for grip feel and vehicle control
• With open ends for use with handlebar ends, including end caps if handlebar ends are not to be used
• Easy installation with only 2 cables +/-
• Should be connected to a consumer switched via the ignition - often the main headlight connector is suitable
• 12 Volt

Dimensions (approx.):
Length: each 120 mm or 130 mm
Grip surface width: 100 mm or 110 mm
Outer diameter grip surface: 32.5 mm
Outer diameter inner/outer: 52/38 mm
Cable length inner sides of grips to merging of both cables right/left: 710/820 mm
Cable length merging to vehicle electrical system connection: 1600 mm
Weight: 300g

Approval:
Handlebar grips do not require approval, therefore no test marks, certificates, or ABE's are needed.

Price per set for both handlebar sides (not suitable for quad and ATV models with thumb throttle)