Rizoma Riser Handlebar Clamp for 25.4 mm AZ430B
For attachment of 25.4 handlebar (1 inch) on the fork crown.
- Stylish aluminium clamp supports
- For a classic look, an extremely robust surface, very high quality anodisation
- For all handlebars with a 25.4 mm (1”) outer diameter
- Attachment via M12 threaded rods and nuts on the fork crown
Height up to mid-handlebar clamp: 42 mm
Diameter foot: 27 mm
Diameter of the handlebar clamp: 25.4 mm (1 inch)
Permit (in Germany):
With TÜV part certificate.
The tester (TÜV, Dekra, etc.) must certify the proper installation before use on public roads.
This test certificate must then be carried while driving, similar to the operating permit.
As soon as possible (that is, the next visit to the road traffic department for registration or change of address) this should be transferred into the registration documents.
For models not listed here, the registration can usually be by special approval – in this case, the discretion of the test engineer is applicable.
Price per pair
For our Swiss customers:
Please note, that due to the Swiss traffic regulation you’ll need a valid allowance certificate which will be issued by our Swiss shop assistants and will NOT be delivered with the article.