to the cart »

Interesting offers:

Shido lithium battery LT14B-BS (YT14B-BS, GT14B-4)

Order ID 50010800460
More Views

Shido lithium battery LT14B-BS (YT14B-BS, GT14B-4)

Order ID 50010800460
Shipping & delivery
Product Questions

YT14B-BS Shido Lithium Battery (GT14B-4)

The high-quality alternative with substantially higher starting power, longer life and considerably lower weight.

Lithium-ion technology offers the following advantages as compared to “standard” lead-acid batteries:

  •  starting current is up to 30% higher – over 40 CA (lead-acid battery: 10 CA)
  •  substantially longer life at over 2,000 cycles under JISD standard (the lead-acid battery only survives around 150–300 complete cycles)
  •  less weight; 1,100 g as compared to 3,900 g equals a reduction of over 70%
  •  including distance spacers which hold the battery firmly and securely in the battery box – without any further adjustment work!
  •  no environmental contamination – contains no acid or heavy metals such as lead, cadmium or mercury
     contains no acid, cannot leak
  •  quick charging with the compatible charger – up to 90% within 6 minutes
  •  energy saving – stable discharge voltage and low internal resistance
  •  extremely safe – non-explosive and non-flammable

12 V
Length x width x height = 150 x 70 x 145 mm
Terminals: positive on the left, negative on the right
Charging current: standard 2.5 A, maximum 24 A
Cold-cranking amps (CCA): 290 A

Almost any high-quality motorbike charger that uses a pulse charging method and has an automatic switch-off can be used.
The keep-fresh-function of these chargers does not work with lithium batteries.

If you connect such a charger, it charges the battery once, then switches off and the users of the motorcycle using current would empty the battery although the charger is still connected.

To make a permanent connection possible, (f.e. in winter time) so the battery is always nearly fully loaded, you need special lithium chargers (f.e. CTEK).There is no automatic maintenance function on these chargers. This requires a special Ctek charger. 
Never use chargers that work with a charging voltage of more than 15 V (for example when working with high peak voltages for checking whether desulphation is required) - you find a note in the instruction manual of your existing charger!

Starting problems may occur at extremely low temperatures (below around −10° C) due to an increase in battery resistance.
However, the integrated management system means that this is less of an issue than with most conventional lithium batteries.
There is also a simple trick you can use: if the battery is not working well under extremely cold conditions, switch your headlights on for between 10 and 15 seconds. That warms up the battery and improves the starting power.

Advice for battery disposal and deposit

You may also be interested in the following product(s)


Nicht erforderlich