Rizoma Conus Alu Handlebar MA009, 740 x 50 mm
Very stable, tapered aluminium handlebar with a diameter of 28.6 mm at the handlebar clamp and 22 mm at the grips.
- Significantly more flexional rigidity than continuous 22 mm handlebars
- Form and width provide an ergonomic sitting position and good handling
- Superior anodisation
- For models that already have a tapered handlebar
- Also for many models with original, continuously 22-mm thick handlebars with the then additionally necessary handlebar clamp adapters
Width 740 mm
Height 50 mm
Handlebar clamp width 140 mm
Inner Ø for handlebar ends: 13 mm
Permit (in Germany):
With TÜV part certificate.
The tester (TÜV, Dekra, etc.) must certify the proper installation before use on public roads.
This test certificate must then be carried while driving, similar to the operating permit.
As soon as possible (that is, the next visit to the road traffic department for registration or change of address) this should be transferred into the registration documents.
In the case of models not listed in the certification, the registration must be by special approval as appropriate.
For our Swiss customers:
Please note, that due to the Swiss traffic regulation you’ll need a valid allowance certificate which will be issued by our Swiss shop assistants and will NOT be delivered with the article.