Speed Brakes replacement brake lines with braided steel coating.
Routing as original or alternatively:
2-part direct line at front = a line leads directly from the brake pump on the handlebars to each of the brake calipers
With ABE type approval or TÜV component certificate for direct routing, the clutch line does not require TÜV certification and is approval-free.
As well as an uncompromised service life, the lines offer the following improvement in comparison to the original rubber lines: Optimum pressure point even with heavy use, shorter braking distance due to better dosing, less hand power required.
The connections can be rotated for fitting, top-quality anodised aluminium connectors allow for easy fitting without causing defects in the coating, PTFE inner line, all lines with transparent protective coating, aluminium connectors with stainless steel swaging.
Spring steel quality V2A line (pressure above 1,050 atm).
Approx. 60% less weight.
The original banjo bolts can be used for fitting – any double banjo bolts required are included.
Compatible M10x1.25 screws (front caliper only) or M10x1.00 (all others) may also be ordered separately (under order numbers 6032054.... and following).