

SW-MOTECH Rear bag/luggage roll waterproof Drybag
- Free shipping from 199,- €
- 450+ Motorcycle Parts
- 65.000+ products
Product description
Fits these bikes
Shipping & Return
Description
Product Description: SW-MOTECH Rear Bag/Luggage Roll Waterproof Drybag
The SW-MOTECH Rear Bag/Luggage Roll Waterproof Drybag offers ultimate protection thanks to tear-resistant 500D PVC. With a universal fit, it fits almost any motorcycle. Enjoy the freedom to transport your luggage safely and dry.
- Tear-resistant 500D PVC: This rear bag made of extremely durable material offers reliable protection against weather conditions and remains waterproof even under extreme conditions.
- Universal Fit: Whether motorcycle, scooter, or quad, the SW-MOTECH rear bag can be easily adjusted and offers flexibility for almost all vehicles.
- Intelligent Compression: The clickable straps allow optimal adjustment of the storage space and ensure stability even when not fully loaded.
- Reflective Inserts: Increase your safety during night rides with reflective elements that significantly improve your visibility in traffic.
- MOLLE Adaptation: Additional bags can be easily attached to expand your storage space individually and adapt to your needs.
- Variable Storage Space: Choose between 35 and 60 liters of capacity to be well-prepared for every tour. The Drybag 350 weighs 1050 g, the Drybag 600 1280 g.
Detailed Product Description:
Rear Bag/Luggage Roll Drybag
Waterproof rear bag made of extremely durable, particularly tear-resistant, and absolutely waterproof 500D PVC.
Details:
- universal fit for almost all motorcycles, scooters, quads
- the large main compartment is tightly closed with a transverse Velcro/roll closure and secured laterally and from above with clickable straps
- these upper straps also serve to compress the bag when the storage space is not fully utilized
- as a special feature, another drybag can be securely attached to these click closures on the drybag - for aerodynamic reasons, however, a maximum of two rear bags should be combined
- reflective inserts for better visibility
- with MOLLE adaptation for attaching additional bags
- 4 loop straps in click closures give the bag reliable hold on almost any seat and luggage racks
Dimensions (approx.):
Drybag 350: 35 liters of storage space
Drybag 600: 60 liters of storage space
Drybag 350 Diameter x Length outside: 30 x 55 cm
Drybag 600 Diameter x Length outside: 35 x 70 cm
Width x Height viewing window: 9 x 5 cm
Width x Height padded carry handle: 13 x 5 cm
Maximum length x Width fastening straps: 80 x 2.5 cm
Maximum length x Width shoulder strap: 140 x 3.8 cm
Drybag 350 Weight: 1050 g
Drybag 600 Weight: 1280 g
Options:
- security lock to secure the bag to the motorcycle (Order No. 5617241200000003)
- paint protection film (Order No. 6089511094001590 or 5705021094001790) can additionally protect sensitive parts even with coarse dirt
- with the luggage holding strap pair, the bags can be attached to the license plate mounting (Order No. 0024021188000000)
Approval:
Rear bags do not need to be approved, therefore do not require any test marks, certificates, or ABE's.
Price per piece
Universal Mounting Rear Bag:
- place the bag on the seat or luggage rack as desired
- always keep at least 5 cm distance from the exhaust and its exhaust stream - this applies to the bag as well as the fastening straps
- initially lay the front straps (to frame tubes, footrest holders, etc.) so that neither your freedom of movement is restricted nor any non-load-bearing parts (e.g. rear fairing) are subjected to excessive stress
- then tighten just enough to hold the bag in position and prevent it from sliding backward
- now individually find load-bearing attachment points for the rear fastening straps on each motorcycle
- these are usually the license plate holder, grab handles, frame tubes, indicator mounts (if they are stable enough), etc.
- the fastening straps can be attached independently on the right and left - if this is not possible, you can also connect them to create a continuous strap from right to left - usually routed between the license plate and its holder or the splash guard
- optional holders (0024021188000000) can also be screwed to the license plate mount towards the rear wheel (please do not place on the visible side of the license plate as shown in the illustration, as it would otherwise be obscured) - this creates two ideally suited lashing points
- please also ensure that nothing is pinched or put under too much tension
- then tighten the two fastening straps just enough so that the bag is not yet completely secure
- check and adjust the desired position of the bag again if necessary
- only then tighten all 4 straps evenly so that the bag sits securely and cannot shift even when loaded
- secure the strap ends against flapping - they are equipped with rubber rings for this purpose
- generally, always cautiously increase speed on the first rides or with new loads
Item No. 0000548210000003
About the brand
Founded in 1999 by three enthusiastic motorcyclists, there are now more than 260 bright minds behind the brand with the red bull. Today, SW-MOTECH is one of the world's leading suppliers of motorbike accessories and exports to over 65 countries worldwide. But one thing has not changed: SW-MOTECH is united by a passion for motorbikes.
Manufacturer information:
SW-Motech GmbH & Co. KG / Crefo-Factoring
Ernteweg 7 / 10
35282 Rauschenberg
Germany
Email address: info@sw-motech.com
Fits the following bikes
POLO Club members pay €3.99 to return your ordered goods, non-members pay €5.99. You can conveniently return them via DHL or hand them in at your nearest POLO store free of charge.
Simply use our returns portal at returns.polo-motorrad.com.