SW-MOTECH handlebar transfer NN for 22 mm handlebar black

Description

Product Description: SW-MOTECH Handlebar Riser

The SW-MOTECH handlebar riser offers you more riding comfort and a better view of the traffic. With a rise of 30 mm and a setback of 21/22 mm, your riding experience is optimized.

• CNC-milled from high-strength aluminum alloy for maximum stability and durability on every ride. The precise processing ensures a reliable and long-lasting product.
• Powder-coated for long-lasting durability, to withstand the demands of any weather condition. The coated surface is not only protective but also gives your motorcycle a stylish look.
• Easy to install, as it simply screws under the handlebar. This straightforward installation allows you to quickly benefit from the advantages of the handlebar riser.
• Compatible with almost all models with 22 mm or tapered 28.6 mm handlebars, provided the clamping is straight. This versatility makes it ideal for a wide range of motorcycles.
• No extension of control cables required, if your model is listed in the ABE. If necessary, only a different routing is required, minimizing additional adjustments.

Detailed Product Description:

SW-Motech Handlebar Riser

Do you want to sit more upright and thus have more comfort and a better overview of the traffic without directly changing the handlebar?
These spacers relocate the handlebar position approximately 30 mm upwards and approximately 21/22 mm backwards.

Details:

• for a more relaxed seating position
• CNC-milled from high-strength aluminum alloy
• powder-coated for long-lasting durability
• simply screws under the handlebar
• suitable for almost all models with 22 mm or tapered 28.6 mm handlebars if the clamping is straight
• where the relocation has been tested can be found in the attached ABE
• the length of the control cables and brake lines usually does not need to be extended if the model is listed in the ABE - if necessary, a slightly different routing may be required
• includes a matching stylish clamping bracket for the handlebar

Dimensions (approx.):
for 22 mm handlebars:
Length x Width x Height Overall: 79 x 28 x 56 mm
Width at bottom mounting: 21 mm
Elevation: 30 mm
Setback: 21 mm
Hole spacing of mounting: 32-38 mm
Weight: 400 g
for 28 mm handlebars:
Length x Width x Height Overall: 89 x 30 x 60 mm
Width at bottom mounting: 23 mm
Elevation: 30 mm
Setback: 22 mm
Hole spacing of mounting: 37-46 mm
Weight: 440 g

Approval (in Germany):
With ABE
The supplied ABE booklet must be carried during the ride.
An entry in the vehicle documents is possible for convenience, but not necessary.
For models not listed here, the handlebar riser can be registered as an individual approval at TÜV (old federal states) or DEKRA (new federal states) at the discretion of the inspector.

For our Swiss customers:

Please note that in Switzerland the road legislation does not correspond to the EU. A clarification for approval for the Swiss motorcycle vehicle inspection must be clarified in the store/online shop before ordering. Technical articles that are rejected for registration can unfortunately no longer be returned. Costs may be incurred for issuing a necessary Swiss certification if the goods were not purchased in Switzerland.

Price per pair