Shin Yo LED taillight Monster/Enduro/Chopper clear glass

Description

Product Description: Shin Yo LED Tail Light Monster/Enduro/Chopper

The Shin Yo LED Tail Light Monster/Enduro/Chopper combines style and functionality. It offers clear license plate lighting and a distinctive light pattern. The easy installation makes it ideal for your machine.

• Universal Design: This tail light perfectly adapts to many models, such as older Ducati Monster and KTM LC4 620, thanks to its universal brake/tail light combination.
• Optimal Luminous Intensity: The integrated chrome reflector ensures a more beautiful light pattern that provides visibility and safety both day and night.
• License Plate Lighting: The clear downward-facing license plate lighting ensures your license plate is always clearly visible.
• Easy Installation: The mounting is easily done via two M6x1.0 threaded rods with nuts, ensuring a stable installation.
• Energy Efficient: With a voltage of 12 volts and a power of 0.9/2.7 watts (tail/brake light), it is both powerful and energy efficient.
• Optimally Tuned Dimensions: The width of 165 mm, height of 65 mm, and depth of 89 mm fit perfectly with your machine and offer a harmonious appearance.

Detailed Product Description:

ShinYo LED Tail Light Monster/Enduro/Chopper

Universal brake/tail light with license plate lighting as it was also standard on some older motorcycles (e.g., Ducati Monster, KTM LC4 620, various scooters, etc.).

Details:

• with chrome reflector for a beautiful light pattern
• downward radiating clear license plate lighting
• the mounting is done via two threaded rods with nuts on the back (M6x1.0)
• 12 volts, 0.9/2.7 watts (tail/brake light)

Dimensions (approx.):
Width x Height x Depth: 165 x 65 x 89 mm
Width x Depth License Plate Lighting: 70 x 13 mm
Distance Center/Center of the Fastening: 110 mm
Thread Length: 22 mm
Cable Length: 24 cm
Diameter of Round Plug Sockets: 3.5 mm
Weight: 248 grams

Cable Assignment:
Green = Tail light/License plate lighting
Red = Brake light
Black = Ground

Options:

• also available with bulb (lens/clear glass order number 50160300030/50160300031)
• to avoid having to change the vehicle's cables to round plug sockets, there are adapters for many models to the original connector or for the bulb holder of the original tail light (order number 50160300960 and following)
• for some models with CAN-BUS network, it may be necessary to additionally connect resistors to avoid error messages in the cockpit for a defective bulb (order number 50220000360 and following)

Approval:
With E-mark.
The tail light has an E-mark and requires no further paperwork.
It can therefore be installed without any problems, according to the installation regulations.

Price per piece