Shin Yo LED integration indicator pair Cube V tinted glass

Description

Product Description: Shin Yo LED Built-in Indicator Pair Cube

The Shin Yo LED Built-in Indicator Pair Cube impresses with its compact design and excellent visibility. With tinted glass and optional mounting, they offer flexibility and style. Thanks to powerful SMDs, they are a highlight both in operation and design.

• Compact Design: Weighing only 6 g per indicator and measuring 27 x 10 x 13 mm horizontally, these indicators are extremely small and lightweight.
• Flexible Mounting: The indicators can be mounted both horizontally and vertically, providing you with maximum adaptability for your motorcycle.
• Powerful SMDs: Three SMDs ensure impressive visibility, so you are well seen even in poor lighting conditions.
• Tinted Glass: The tinted glass casing makes the indicators almost invisible when turned off, contributing to an elegant appearance.
• Technical Data: Operating voltage of 12 volts and 1 watt power per indicator, ideal for modern motorcycles with E-approval.
• Approval: Approved with E-mark, these indicators can be safely mounted without additional paperwork.

Detailed Product Description:

Shin Yo LED Built-in Indicator Pair Cube

Extremely small and lightweight built-in indicators.

Details:

• for laminating or gluing
• three powerful SMDs ensure the best visibility in operation
• very unobtrusive due to tinted glass when not illuminated
• Version H for horizontal mounting
• Version V for vertical mounting
• 12 volts, 1 watt

Dimensions (approx.):
Width x Height x Depth horizontally: 27 x 10 x 13 mm
Width x Height x Depth vertically: 11 x 23.5 x 13 mm
Cable length: 37 cm
Ø Round plug sleeves: 3.5 mm
Weight: 6 grams each (!)

Cable Assignment:
yellow = plus indicator
black = ground

ATTENTION:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an allowable level.

Options:

• also available as even smaller Micro Cube (Order numbers 50170400830 and 50170400831)

Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require further paperwork.
They can therefore be installed without further ado, in accordance with installation regulations.

For motorcycles with E-approval (from about mid/end of the 90s) apply:
Minimum distance between indicator glass to indicator glass front/rear: 240/180 mm
Minimum distance between indicator glass to headlight glass: 75 mm
Maximum distance of rear indicator to the outermost end of the tail: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility upward and downward: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles approved individually or outside the EU, different dimensions may apply.

Price per pair