Shin Yo LED indicator pair Tiny for rear M8 black, tinted glass

Description

Product Description: Shin Yo LED Indicator Pair Tiny for Rear M8

The Shin Yo LED Indicator Pair Tiny for Rear M8 combines functionality and style in a compact design. The bright LEDs in the extremely lightweight plastic housing provide visible safety and easy installation.

• Extremely lightweight plastic housing: The housing of the indicator pair is made of ultra-lightweight plastic, which minimally affects the overall weight of your motorcycle and allows for easy handling.
• Bright LED: Equipped with powerful LEDs, the indicator pair ensures excellent visibility and thus increases safety in traffic, especially in poor lighting conditions.
• Easy installation: The attachment is done via an M8x1.25 thread with a plastic nut, ensuring uncomplicated and stable installation.
• Compact dimensions: With a size of only 23 x 13 x 15 mm without thread, the indicator pair seamlessly integrates into the design of your motorcycle without being obtrusive.
• Technical details: Operating voltage of 12 volts and power consumption of 0.5 watts ensure energy efficiency and a long lifespan for the LEDs.
• Various customization options: Optional adapters and extensions allow for installation on different motorcycles and facilitate connection to existing cable systems (Product numbers: 50170400860, 50170400870, 50170400871).

Product Description in Detail:

ShinYo LED Indicator Pair Tiny for Rear

Extremely small indicator, approved for rear use only.

Details:

• extremely lightweight plastic housing
• attachment via M8x1.25 thread and plastic nut
• bright LED
• 12 volts, 0.5 watts

Dimensions (approx.):
Width x Height x Depth without thread: 23 x 13 x 15 mm
Thread length: 18 mm
Cable length: 32 cm
Ø Round plug sleeves: 3.5 mm
Weight: 8 grams each (!)

WARNING:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Options:

• if the legal distances cannot otherwise be maintained or if the license plate is simply in the way, additional necessary extensions for the indicator arm can be used (Order No. 50170400860, 50170400870, or 50170400871)
• for easier connection without modifications to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following  as well as 50170502000 and following)
• if the installation is to take place instead of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates that make installation easy (Order No. 50170100000 and following)

Approval:
With E-mark for rear.
The indicators have an E-mark and require no further paperwork.
They can therefore be installed in accordance with the mounting regulations without any issues.

For motorcycles with E-approval (from around mid/late 90s) the following apply:
Minimum distance from indicator lens to indicator lens at the rear: 180 mm
Maximum distance from rear indicator to the outermost end of the tail: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility upward and downward: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles approved individually, or in non-EU countries, different measurements may apply.

Price per pair