Shin Yo indicator pair Peak 12V/H21 M10 long, black

Description

Product Description: Shin Yo Indicator Pair Peak 12V/H21 M10

The Shin Yo Indicator Pair Peak 12V/H21 M10 offers universal turn signals with 21-watt halogen bulbs. The indicators ensure easy installation and exceptional visibility.

• Universal Turn Signals: The installation of the 21-watt halogen indicators is a breeze for models already equipped with 21-watt indicators from the factory.
• Light Emission at the Tip: The rearward light emission provides additional indicator control and improves visibility, making your ride safer.
• Lightweight Plastic Housing: A robust yet lightweight plastic housing ensures long-lasting durability and easy handling.
• Rubber Foot Against Vibrations: The rubber foot reduces vibrations, guaranteeing a long lifespan. This keeps your motorcycle accessories in top condition.
• Available in Various Sizes: Available in short and long to flexibly comply with legally required distances. Perfect adjustment to your motorcycle.
• Easy Connection: For vehicles already using 21-watt indicators, no electrical modifications are necessary. This makes installation straightforward.

Detailed Product Description:

ShinYo Indicator Pair Peak 12V/H21 M10

Universal turn signals with 21-watt halogen bulbs for easy connection on models that also originally use 21-watt indicators.

Details:

• with rearward light emission for additional indicator control and even better visibility
• lightweight plastic housing
• with rubber foot against vibrations for a long lifespan
• mounting via M10x1.25 thread and nut
• installation note: The indicators have ventilation holes on one side - please install them so that they point downward
• available in short and long so you can comply with legally required distances depending on the installation location (see below)
• 12 volts, 21 watts halogen
• for vehicles that originally have 21-watt indicators, NO electrical modifications (resistors, different flasher relay, etc.) are necessary

Dimensions (approx.):
Width without thread short/long x Height x Depth: 66/86 x 27 x 31 mm
Ø at the base: 16.5 mm
Thread length: 20 mm
Cable length short/long: 22/20 cm
Ø round plug sleeves: 3.5 mm
Weight short/long: each 37/42 g

Cable Assignment:
With bulb, arbitrary!

Options:

• also available as LED version (Order number 50170400910 and following)
• for easier connection without modifications to the original indicator cables, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if the installation is to replace the original indicators, their mounting is often too large - for many manufacturers/models, there are suitable adapter plates that make installation possible without problems (Order No. 50170100000 and following), the hole of the adapter plate may need to be enlarged to M10
• replacement bulb 12 volts halogen 21 watts BAY9S (Order number 50150000390)

Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require any further documents.
They can therefore be installed without any issues, in accordance with installation regulations.

For motorcycles with E-approval (from about mid/late 90s) the following apply:
Minimum distance indicator glass to indicator glass front/rear: 240/180 mm
Minimum distance indicator glass to headlamp glass: 75 mm
Maximum distance rear indicator to the outermost end of the tail: 300 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility upward and downward: 15 degrees
Permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles approved individually, or in non-EU countries, different dimensions may apply.

Price per pair