Shin Yo handlebar end indicator pair Bull's Eye 12V/H21 metal chrome

Description

Product Description: Shin Yo Handlebar End Indicator Pair Bull's Eye 12V/H21 Metal Ø40mm

The Shin Yo handlebar end indicator pair Bull's Eye 12V/H21 Metal Ø40mm combines stylish design with functional practicality. It is ideal for motorcycles that use original 21-watt indicators. Easy installation without electrical modifications.

• High-quality metal housing: This handlebar end indicator pair is made of solid metal and offers a robust, durable solution for your motorcycle. It gives the handlebar end a harmonious finish.
• Suitable for almost all handlebars: Fits handlebars with an inner diameter of 12-22 mm, covering almost all standard handlebars. Only a few original models deviate from this measurement.
• 21-watt halogen bulb: Equipped with powerful 12-volt, 21-watt halogen bulbs that ensure high visibility. No changes to the electrical system are required.
• Easy connection: Thanks to suitable adapter cables and the exact cable length of 62 cm, the indicator can be easily integrated without changing the original wiring.
• Practical indicator control: The glass on the back allows you to check the indicator function directly on the indicator. This also provides better visibility in road traffic.
• Meets E-mark: The product comes with an E-mark for the front area, allowing easy installation in accordance with applicable regulations.

Detailed Product Description:

ShinYo Handlebar End Indicator Pair Bull's Eye 12V/H21 Metal Ø40mm

High-quality handlebar weights with integrated indicators for easy connection on models that also use original 21-watt indicators.

Details:

• solid metal housing
• harmoniously closes the handlebar end
• indicator control through the glass on the back also possible on the indicator itself
• also provides better visibility
• securely and firmly attached by the clamping rubber in the handlebar end
• suitable for almost all handlebars with an inner diameter of 12-22 mm - these are almost all handlebars, only a few original handlebars have a smaller Ø
• with 12 volts, 21-watt halogen bulb
• for vehicles that also have original 21-watt indicators, NO changes to the electrical system (resistors, different flasher relay, etc.) are necessary

Dimensions (approx.):
Width from handlebar end x diameter: 52 x 40 mm
Length in the handlebar: 60 mm
Cable length: 62 cm
Weight: each 75 g

Cable assignment:
Orange = Indicator (+)
Ground runs through the housing (for aluminum handlebars, a separate ground cable must be laid independently)

Options:

• for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• spare bulb 12-volt halogen 21-watt BAY9S (Order number 50150000390)

Approval:
With E-mark for the front.
The indicators have an E-mark and do not require any further documentation.
They can therefore be installed without any further ado, in accordance with the installation regulations.

For motorcycles with E-approval (from around mid/late 90s) the following apply:
permissible installation height: 350 to 1200 mm
geometric visibility inward/outward: 20/80 degrees - please pay attention to the backward bend of the handlebar!
geometric visibility upward and downward: 15 degrees - please pay attention to the upward or downward bend of the handlebar!
permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles that have been individually approved, or those outside the EU, different measurements may apply.

Price per pair