Rizoma LED indicator Action alu M8 FR028B black

Description

Product Description: Rizoma LED Turn Signals Action Alu M8

Experience the Rizoma LED Turn Signals Action Alu M8, universal directional indicators in an elegant aluminum housing. The distinctive light pattern ensures exceptional visibility and safety.

• Milled Aluminum Housing: The high-quality anodized housing gives your motorcycle a classy look and guarantees durability.
• Vibration-Damping Rubber Base: The integrated rubber base minimizes vibrations, ensuring a long lifespan for the turn signals.
• Includes Turn Signal Frequency Accessories: The necessary parts to adjust the turn signal frequency are included, so no additional resistors are needed.
• State-of-the-Art SMD Technology: Thanks to this technology, the turn signals are extremely bright and significantly enhance your visibility on the road.
• Practical Mounting: With an M8x1.25 thread and nut, installation is simple and quick.
• Technical Data: 12 volts, dimensions: 79x24x26 mm, weight without resistors: 50 g. Perfectly suited for different motorcycle models.

Detailed Product Description:

Rizoma LED Turn Signals Action Alu M8

Universal directional indicators in an elegant aluminum housing with a distinctive light pattern.

Details:

• milled aluminum housing, high-quality anodized
• with rubber base against vibrations for a long lifespan
• the necessary parts to bring the turn signal frequency to an allowable level, if the original turn signal has 10 watts or 21 watts, are included in the delivery - so for most models no additional parts such as resistors are necessary
• mounting via M8x1.25 thread and nut
• very bright thanks to state-of-the-art SMD technology 
• 12 volts

Dimensions (approx.):
Width without thread x height x depth: 79 x 24 x 26 mm
Ø at the base: 14 mm
Thread length: 20 mm
Cable length: 40 cm + possibly included resistors
Ø round plug sleeves: 3.5 mm
Weight without resistors: 50 g

Cable Assignment:
Red = Positive Turn Signal
Black = Ground

Options:

• if otherwise the legal distances cannot be maintained or simply the license plate is in the way, additional necessary extensions for the turn signal arm can be used (Order No. 50170003551 or 50170003561)
• for easier connection without changes to the cables of the original turn signals, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following  as well as 50170502000 and following)
• if the installation is to take place instead of the original turn signals, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which the installation is then easily possible (Order No. 50170100000 and following)
• for models where the adjustment of the turn signal frequency does not work with the included resistors, or resistors are not suitable due to space reasons, we recommend using the Flasher Kit 50170003453
• with the adjustable resistor itself also usable for models with CAN-BUS system without any problems (Order number 50220000640)

Approval:
With E-mark for front and rear.
The turn signals have an E-mark and require no further papers.
They can therefore be installed without any issues, according to the installation regulations.

For motorcycles with E-approval (from around mid/late 90s) the following apply:
Minimum distance between turn signal glass to turn signal glass front/rear: 240/180 mm
Minimum distance between turn signal glass to headlight glass: 75 mm
Maximum distance from rear turn signal to the outermost end of the tail: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inwards/outwards: 20/80 degrees
Geometric visibility upwards and downwards: 15 degrees
Permissible turn signal frequency: 60 to 120 cycles per minute
For older models, vehicles that were put into circulation by individual approval, or outside the EU, different dimensions may apply.

Price per piece