Oxford LED-running light indicator pair with rear li NightSlider M8

Description

Product Description: Oxford LED Sequential Indicator Pair with Tail Light NightSlider M8

The Oxford LED Sequential Indicator Pair with Tail Light NightSlider M8 offers you universal, dynamic rear indicators. Look forward to enhanced safety and appealing design. With E-mark, easy to install, and durable.

• Universal Application: The Oxford LED Sequential Indicator Pair with Tail Light NightSlider M8 fits almost any motorcycle and offers you the perfect combination of indicator and tail light.
• Dynamic Indicator System: When activated, the sequential indicator light dynamically sweeps from the inside to the outside, increasing your visibility in traffic.
• Integrated Brake Light: The tail light strip becomes brighter when braking, enhancing safety through better visibility day and night.
• Robust Design: The metal housing with integrated rubber base protects against vibrations and ensures long durability.
• Modern SMD Technology: With 7x indicator and 7x position light, the LEDs provide excellent brightness and efficiency.
• Easy Installation: Equipped with M8x1.25 thread and nut, the installation of the Oxford LED Sequential Indicator Pair with Tail Light NightSlider M8 is uncomplicated.

Detailed Product Description:

Oxford LED Sequential Indicator Pair with Tail Light NightSlider M8

Universal dynamic directional indicators for the rear with integrated brake tail light (3in1) behind tinted glass.

Details:

• When activated, the sequential indicator light dynamically sweeps from the inside to the outside
• The tail light strip increases visibility and becomes brighter when the brake is applied
• Robust metal housing
• With rubber base against vibrations for long durability
• With bright SMD technology (7x indicator + 7x position light each)
• Mounting via M8x1.25 thread and nut
• 12 volts, 2 watts
• Includes 2 resistors to regulate the flashing frequency - works with most models (otherwise see options)

Dimensions (approx.):
Width from thread x Height x Length: 111 x 15 x 14.5 mm
Thread length: .. mm
Ø at base: .. mm
Cable length: ... cm
Ø round plug sleeves: 3.5 mm
Weight: each .. g

Cable assignment:
... = Positive indicator
... = Positive tail light
... = Positive brake light
... = Ground

CAUTION:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flashing frequency to an acceptable level.

Options:

• If the legal distances cannot otherwise be maintained or the license plate is simply in the way, additional suitable extensions for the indicator arm can be used (Order No. 50170400860, 50170400870, or 50170400871)
• For easier connection without modifications to the original indicator cables, there are appropriate adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• If mounting is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which the mounting is then possible without any problems (Order No. 50170100000 and following)
• With the adjustable resistor, also easily usable for models with CAN-BUS system (Order number 50220000640)

Approval:
With E-mark for rear.
The indicators, tail light, and brake lights have an E-mark and do not require additional documents.
They can be installed without further ado, in accordance with installation regulations.

For motorcycles with E-approval (from around mid/late 90s) the following apply:
Minimum distance from indicator glass to indicator glass at the rear: 180 mm
Maximum distance from rear indicator to the outermost end of the tail: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility upwards and downwards: 15 degrees
Permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles that have been individually approved, or outside the EU, different dimensions may apply.

Price per pair