

Motogadget LED indicator m-Blaze Pin M8 Ø16mm black
- Free shipping from 199,- €
- 450+ Motorcycle Parts
- 65.000+ products
Product description
Shipping & Return
Description
Product Description: Motogadget LED Indicator m-Blaze Pin M8 Ø16mm
The Motogadget LED Indicator m-Blaze Pin M8 Ø16mm combines minimalist design with innovative technology. This particularly compact turn signal offers optimal visibility thanks to patented technologies. Perfect for those who value style and safety.
- Delicate appearance due to a transparent glass body and a reduced aluminum base. This LED indicator is an elegant highlight for any motorcycle.
- State-of-the-art IntensiLED® Technology ensures extremely bright light. This keeps you safely visible on every ride, even in the most challenging lighting conditions.
- TranzLight® Technology (TLT) offers a wide beam angle. This significantly increases your visibility and safety in traffic.
- High-quality aluminum housing made from CNC-machined material. It is characterized by exceptional durability and resilience.
- Electronic voltage preparation guarantees reliable operation. The integrated protective electronics protect against overvoltage and other disturbances.
- Practical mounting using M8 thread. The indicator is easy to install and compatible with most motorcycles.
- Technical data: Operating voltage 12 volts, power 3 watts, weight 12 g. The compact design integrates seamlessly into the design of your motorcycle.
- E-mark for front and rear. The indicator complies with applicable installation regulations and can be used without any issues.
Detailed Product Description:
Motogadget LED Indicator m-Blaze Pin M8 Ø16mm
Extremely small and high-quality turn signal for front and rear.
Details:
- very delicate appearance due to transparent glass body and very small, reduced aluminum base
- extremely bright light through state-of-the-art IntensiLED® Technology
- patented TranzLight® Technology (TLT) with a wide beam angle for best visibility and safety
- in high-quality CNC-turned aluminum housing
- electronic voltage preparation and secure protective electronics
- mounting using M8 thread
- 12 volts, 3 watts
Dimensions (approx.):
Total length with thread: 38.5 mm
Length without mounting thread: 19.5 mm
Largest diameter: 16 mm
Cable length: 100 cm
Weight: 12 g
ATTENTION:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash rate to an acceptable level.
Options:
- if otherwise the legal distances cannot be maintained or simply the license plate is in the way, additional necessary matching extensions for the indicator arm can be used (Order No. 50170400860, 50170400870 or 50170400871)
- for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
- if the installation is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which the installation is then easily possible (Order No. 50170100000 and following)
Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require any additional papers.
They can therefore be installed without further ado, in compliance with installation regulations.
For motorcycles with E-approval (from around mid/late 90s) the following apply:
Minimum distance between indicator lens to indicator lens front/rear: 240/180 mm
Minimum distance between indicator lens to headlight lens: 75 mm
Maximum distance of rear indicator to the outermost end of the tail: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility up and down: 15 degrees
Permissible flash rate: 60 to 120 cycles per minute
For older models, vehicles that were put into circulation by individual approval, or outside the EU, different dimensions may apply.
Price per piece
Item No. 5705401020000800
About the brand
Motogadget is a manufacturer of high-quality instruments, add-on parts and electrics for motorbikes. The products, which are produced in Berlin, were first developed for the custom bike sector, but are becoming more and more popular. All products such as speedometers, tachometers, indicators, switch units, mirrors and push buttons for motorbikes are manufactured in elaborate steps using the latest technology and manual work in order to meet the high demands of their customers.
Manufacturer information:
Wollenberger Str. 4 i-j
13053 Berlin
Germany
Email address: nfo@motogadget.de
POLO Club members pay €3.99 to return your ordered goods, non-members pay €5.99. You can conveniently return them via DHL or hand them in at your nearest POLO store free of charge.
Simply use our returns portal at returns.polo-motorrad.com.