Kellermann LED flasher/rear light micro 1000 Rhombus DF chrome right

Description

Product Description: Kellermann LED Indicator/Taillight M8 micro 1000 Rhombus DF

The Kellermann LED Indicator/Taillight M8 micro 1000 Rhombus DF combines innovative lighting technology with multifunctional design. High-performance LEDs ensure maximum safety on the road. Enjoy outstanding visibility and long-lasting quality.

• Modern Indicator: The M8 micro 1000 Rhombus DF offers integrated tail and brake light and enhances your visibility with its high-performance LED technology.
• Easy Installation: With an M8x1.25 thread and nut, installation is straightforward, while the vibration-damping rubber base ensures stable support.
• Excellent Visibility: Two powerful SMDs guarantee optimal visibility in all lighting conditions, whether day or night.
• Kellermann HighPower LED Technology: The unique technology ensures uniform illumination, significantly improving visibility on the road.
• Technical Details: The indicator/taillight/brake light operates at 12 volts with a power of 1/1/1.5 watts and is equipped with a Long Life Protection Guard®.
• Made in Germany: Quality and precision from Germany offer you durability and confidence in your equipment.

Detailed Product Description:

Kellermann Polo LED Indicator/Taillight M8 micro 1000 Rhombus DF

Universal indicator with integrated tail/brake light with state-of-the-art lighting technology.

Details:

• Thanks to the latest high-performance LEDs and custom-developed control technology, the micro 1000 DF ensures better visibility on the road
• Mounting via M8x1.25 thread and nut
• Vibration-damping rubber base
• Two powerful SMDs ensure excellent visibility in operation
• Kellermann HighPower LED Technology
• Long Life Protection Guard®, IC controlled, 330 kHz clocked
• 12 volts, 1/1/1.5 watts (indicator/taillight/brake light)
• Made in Germany

Dimensions (approx.):
Width without thread x height x depth: 78 x 21 x 24 mm
Width x height glass: 50 x 18 mm
Diameter at base: 15 mm
Thread length: 20 mm
Nut width: 13 mm
Cable length: 300 mm
Weight: 50 g

Cable Assignment:
Gray = Indicator +
Gray/White = Tail light +
Gray/Red = Brake light +
Black = Ground -

WARNING:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or reduce the flash frequency to an acceptable level using resistors.

Options:

• If the legal distances cannot otherwise be maintained or if the license plate is simply in the way, additional necessary extensions for the indicator arm can be used (Order No. 60490100050)
• For easier connection without modifications to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• If the installation is to replace the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates that make installation easy (Order No. 50170100000 and following)
• With the adjustable 2-channel resistor (Order No. 50220000640), use on models with CAN-BUS is also possible without problems - 1x necessary per taillight/indicator

Approval:
With E-mark for the rear.
Indicators, tail, and brake lights have an E-mark and do not require additional paperwork.
They can therefore be installed in accordance with installation regulations without any issues.

For motorcycles with E-approval (from about mid/late 90s):
Minimum distance from indicator glass to indicator glass at the rear: 240/180 mm
Maximum distance from rear indicator to the furthest end of the tail: 300 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility up and down: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles approved individually, or outside the EU, different dimensions may apply.

Price per piece