Highsider LED indicator pair Proton Two M8 Ø12mm black, tinted glass

Description

Product Description: Highsider LED Indicator Pair Proton Two M8 Ø12mm

The Highsider LED Indicator Pair Proton Two M8 Ø12mm brings style and functionality to your motorcycle. With a robust metal housing and tinted plastic glass, it offers elegant safety. The universal indicators are easy to install and can be used on almost all models.

• Robust Metal Housing: The indicators consist of a durable metal housing with tinted plastic glass, ensuring both longevity and a stylish design.
• Easy Installation: Thanks to the M8x1.25 thread and nut, installation is quick and hassle-free. Perfect for a variety of motorcycle models.
• Consumption and Performance: The indicators operate at 12 volts, 3.8 watts, and 0.16 A, guaranteeing efficient and reliable signaling.
• Compact Dimensions: With a width of 13 mm, a diameter of 12 mm, and a length of 16 mm, the indicators integrate seamlessly into the motorcycle design.
• Flexible Adaptation: By using adapters and resistors, the indicators can also be used on motorcycles with CAN-BUS systems without any issues. Order numbers for accessories are available.

Product Description in Detail:

Highsider LED Indicator Pair Proton Two M8 Ø12mm

Universal small direction indicators with tinted glass.

Details:

• robust metal housing with tinted plastic glass
• mounting via M8x1.25 thread and nut
• 12 volts, 3.8 watts, 0.16 A

Dimensions (approx.):
Width without thread x Diameter x Length: 13 x 12 x 16 mm
Glass diameter: 11 mm
Diameter at the base: 12 mm
Thread length: 18 mm
Cable length: 36 cm
Ø Round plug sleeves: 3.5 mm
Weight: each 15 g

Cable Assignment:
yellow = indicator (+)
black = ground (-)

WARNING:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Options:

• with the adjustable resistor, usage is possible even on almost all models with CAN-BUS (Order number 50220000640)
• if the legal distances cannot otherwise be maintained or the license plate is simply in the way, additional necessary matching extensions for the indicator arm can be used (Order No. 50170400860, 50170400870 or 50170003561)
• for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if mounting is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which mounting is then easily possible (Order No. 50170100000 and following)
• also available as indicators with integrated taillight (Order number 50160301620)
• also available as indicators with integrated position light or as a pure position light (Order number 50170401270 and 60290004540)

Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require any further paperwork.
They can therefore be installed without further ado, in accordance with the installation regulations.

For motorcycles with E-approval (from about mid/end of the 90s) the following apply:
Minimum distance between indicator glass to indicator glass front/rear: 240/180 mm
Minimum distance between indicator glass to headlight glass: 75 mm
Maximum distance from rear indicator to the outermost end of the tail: 300 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inwards/outwards: 20/80 degrees
Geometric visibility upwards and downwards: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles that were individually approved, or outside the EU, different dimensions may apply.

Price per pair