Highsider LED-DRL universal alu round Ø71,5mm

Description

Product Description: Highsider LED Daytime Running Light Universal Aluminum Round Ø71.5mm

The Highsider LED Daytime Running Light Universal Aluminum Round Ø71.5mm combines impressive brightness with flexible use. Made from robust aluminum, it is suitable for almost any motorcycle with 12V DC.

• 4 Bright SMD LEDs: The daytime running light offers strong lighting performance with its 4 power LEDs at minimal power consumption, ideal for safer daytime rides.
• Versatile Mounting: Thanks to the swivel bracket, you can attach the daytime running light to different parts of your motorcycle to enjoy maximum flexibility.
• Robust Aluminum Housing: The high-quality aluminum construction ensures long-lasting durability and protection from the elements, making it ready for any tour.
• Efficient Energy Consumption: With a power consumption of only 0.2 amperes at 12.5 volts, it provides an efficient lighting solution without burdening the battery.
• Dimensions and Weight: With a diameter of 71.5 mm and a weight of 180 g, the daytime running light elegantly integrates into your motorcycle's design.
• Expandable Options: Optional automatic switch and universal mounts offer additional customization options for your individual needs.

Detailed Product Description:

Highsider LED Daytime Running Light Universal Aluminum Round Ø71.5mm

LED daytime running light with 4 bright SMD in the round aluminum housing on the swivel bracket.

Details:

• Mountable for installation or via the swivel bracket at any location
• In the robust aluminum housing
• For 12V DC - suitable for almost all vehicles with a starter battery
• 4 x 1 watt power LEDs, power consumption at 12.5 volts only 0.2 amperes (approx. 2.5 watts)
• Luminous flux at 12 volts: 150 lumens
• The approval-compliant connection (only alternating operation of low beam and daytime running light) must be carried out independently (see below)

Dimensions (approx.):
Diameter x Depth: 71.5 x 47.5 mm
Width side mounting threads M5x0.8: 56 mm
Height including bracket: 73-77 mm (variable via slot)
Diameter of mounting points on the bracket: 2x 7mm (outer slots), 1x 8.5mm (center)
Distance center/center outer slots on bracket: 30 mm
Cable length: 200 mm
Ø round connector at cable end: 3.5 mm
Weight: 180 g

Cable Assignment:
black = ground (-)
red = plus (+) connect to switched plus (ignition)
white = control line (e.g., for connection to the low beam switch or the optional switch)

Options:

• Automatic switch via sensor for the use of daytime running lights (50220000670)
• Suitable switches for the light (e.g., order number 50220200140, 50220000430)
• Universal bracket for mounting, e.g., on crash bars and other points (order number 60290500090, 60290005160)

Approval:
With E-approval (ECE and SAE tested: 00RL, E4-0020, DOT SAE Y2 08 DRL)
The daytime running light has an E-mark and requires no further documentation.
It can therefore be installed without further ado, in accordance with the installation regulations (see below).

Price per piece

Legal Installation Regulations (in the EU):

• Since April 1, 2013, daytime running lights (DRL) are also allowed on motorcycles. The Essen Institute for Motorcycle Safety (IfZ) points out that only daytime running lights that are ECE tested and approved should be installed. The marking for daytime running lights is "RL". The light color is white. According to IfZ, either one or two DRLs are permitted.
• The daytime running light may be mounted centrally above or below the main headlight as well as laterally. In the case of a lateral installation, the edge of the luminous area of the DRL must not extend more than 25 centimeters from the vehicle center.
• If two daytime running lights are used, they must be arranged symmetrically to the vehicle center, and the distance between the luminous areas must not exceed 42 centimeters. This maximum distance does not apply if the daytime running light is integrated into other front lights or is symmetrically arranged within the vehicle silhouette. If the distance is less than 40 millimeters from a directional indicator, special regulations must be observed (visibility of the turn signal).
• In principle, daytime running lights must be mounted at least 25 centimeters to a maximum of 1.50 meters above the ground and must shine horizontally forward. They may swivel with the steering.
• The daytime running light must automatically turn on when the engine is running. It must automatically turn off when the "driving light" (main headlight low beam) is turned on. This does not apply to the operation of the high beam flasher. According to the Institute for Motorcycle Safety, this could be realized through a separate toggle switch for low beam and DRL.
• Even when the DRL is on, the tail light must be on. The license plate illumination can, but does not have to be, turned on. The installation does not need to be approved by an inspection organization and entered into the vehicle documents. However, the installation must be carried out properly to avoid difficulties during the next main inspection.
• Connection WITH existing light switch:
  The prerequisite for the operation of the daytime running light (DRL) is a manually switched low beam (light switch), otherwise, the function of the DRL would be nullified.
  According to the road traffic regulations, the DRL must be connected so that it turns off when the main headlight is turned on.
  (Exception: operation of the high beam flasher). The rear tail light must always be on, i.e., if necessary, connect to ignition plus.
• Connection WITHOUT existing light switch:
  The daytime running light can also be used on vehicles without a light switch. For this, the following components are required, for example:
  50220000670 Highsider switch via light sensor for daytime running light E-BOX TYPE 1 (automatically switches between low beam and daytime running light via light sensor)