

Highsider LED-DRL universal alu rectangular 145x40,5mm
- Free shipping from 199,- €
- 450+ Motorcycle Parts
- 65.000+ products
Product description
Shipping & Return
Description
Product Description: Highsider Universal LED Daytime Running Light Aluminum Rectangular 145x40.5mm
The Highsider Universal LED Daytime Running Light Aluminum Rectangular 145x40.5mm offers you striking visibility and modern design. The robust aluminum housing ensures durability. Ideal for custom modifications.
- 4 Bright SMD LEDs: The efficient SMD LEDs provide a remarkable brightness of 215 lumens and significantly improve your visibility on the road.
- Universally Applicable: Thanks to the swivel mount, the daytime running light can be easily mounted in various locations on your motorcycle, giving you more flexibility.
- Robust Aluminum Housing: The aluminum housing protects the sensitive components and gives the light an elegant look, adding a modern touch to your motorcycle.
- Technical Compatibility: Suitable for almost all 12V DC vehicles, allowing you easy integration into existing electronics.
- E-Approval: Equipped with an E-mark, the daytime running light is legally secured and can be easily installed without requiring additional paperwork.
- Lightweight: Weighing only 335 g, it does not add extra load to your motorcycle, contributing to better handling.
Detailed Product Description:
Highsider Universal LED Daytime Running Light Aluminum Rectangular 145x40.5mm
LED daytime running light with 4 bright SMD in rectangular aluminum housing on a swivel mount.
Details:
- Can be installed or screwed on at any location via the swivel mount
- In a robust aluminum housing
- For 12V DC - suitable for almost all vehicles with a starter battery
- 4 x 1 Watt Power SMD, current consumption at 12.5 volts only 0.3 amperes (approx. 3.75 watts)
- Luminous flux at 12 volts: 215 lumens
- The compliant connection (only alternating operation of low beam and daytime running light) must be done independently (see below)
Dimensions (approx.):
Width x Height x Depth 145 x 40.5 x 68 mm
Width of side mounting threads M5x0.8: 97 mm
Height including holder: 45 mm
Diameter of mounting points on the holder: 2x 6.5 mm (outer slots), 1x 6 mm (center)
Distance center/center mounting outer slots on the holder: 30-67 mm
Cable length: 200 mm
Ø round connector at cable end: 3.5 mm
Weight: 335 g
Wiring:
black = ground (-)
red = positive (+) connect to switched positive (ignition)
white = control wire (e.g., for connection to the low beam switch)
Options:
- Automatic switch by sensor for the use of daytime running lights (50220000670)
- Suitable switches for the light (e.g., order numbers 50220200140, 50220000430)
- Universal holder for mounting, e.g., on crash bars and other points (order numbers 60290500090, 60290005160)
Approval:
With E-approval (ECE and SAE tested: 00RL, E9-1005, DOT SAE Y2 06 DRL)
The daytime running light has an E-mark and does not require further paperwork.
It can thus be installed without any issues, in accordance with the installation regulations (see below).
Price per Piece
Legal Installation Regulations (in the EU):
- Since April 1, 2013, daytime running lights (DRL) are also allowed on motorcycles. The Essen Institute for Motorcycle Safety (IfZ) points out that only daytime running lights that are ECE tested and approved may be installed. The marking of daytime running lights is "RL". The light color is white. According to IfZ, either one or two DRLs are allowed.
- The daytime running light may be mounted centrally above or below the main headlight or laterally. In the case of lateral installation, the edge of the illuminated area of the DRL must not protrude more than 25 centimeters from the vehicle center.
- If two daytime running lights are used, they must be arranged symmetrically to the vehicle center, and the distance between the illuminated areas must not exceed 42 centimeters. This maximum distance is not required if the daytime running light is integrated into other front lights or if it is symmetrically arranged within the vehicle silhouette. Special regulations apply if the distance is less than 40 millimeters to a turn signal (visibility of the indicator light).
- Generally, daytime running lights must be mounted at least 25 centimeters and a maximum of 1.50 meters above the ground and must shine horizontally forward. They may swivel with the steering.
- The daytime running light must automatically turn on when the engine is running. It must automatically turn off when the "driving light" (main headlight low beam) is turned on. This does not apply to the operation of the flash-to-pass. According to the Institute for Motorcycle Safety, this could be realized with a separate toggle switch for low beam and DRL.
- Even when the DRL is on, the rear light must be lit. The license plate illumination can, but does not have to be turned on. The installation does not need to be approved by an inspection organization and entered into the vehicle documents. However, the installation must be carried out properly to avoid difficulties during the next main inspection.
- Connection WITH existing light switch:
The prerequisite for the operation of the daytime running light (DRL) is a manually switched low beam (light switch), otherwise the function of the DRL would be nullified.
According to the road traffic regulations, the DRL must be connected so that it turns off when the main headlight is turned on.
(Exception: operation of the flash-to-pass). The rear tail light must always be on, i.e., possibly connected to ignition positive. - Connection WITHOUT existing light switch:
The daytime running light can also be used on vehicles without a light switch. For this, the following components are needed, for example:
50220000670 Highsider switch via light sensor for daytime running light E-BOX TYPE 1 (automatically switches between low beam and daytime running light via light sensor)
Item No. 5691701033004060
About the brand
Highsider unites the love of motorbikes. And they love to give your motorbike a distinctive style with their products. That's why they strive for improvement day after day. From their mirror, headlight or indicator/rear light series to small accessories such as handlebar weights, handlebar grips or lamp holders - their claim is always to offer their products with the most modern and efficient technology as well as the highest level of quality, functionality and innovative design. Sit back and let yourself be inspired.
Manufacturer information:
Paaschburg + Wunderlich GmbH
Am Alten Lokschuppen 10a
21509 Glinde
Deutschland
Email: info@pwonline.de
POLO Club members pay €3.99 to return your ordered goods, non-members pay €5.99. You can conveniently return them via DHL or hand them in at your nearest POLO store free of charge.
Simply use our returns portal at returns.polo-motorrad.com.