SW-MOTECH high up PP for 22mm handlebar about 20mm silver

Description

Product Description: SW-MOTECH Handlebar Riser

The SW-MOTECH handlebar riser significantly improves your seating position and ensures increased riding comfort. High-quality aluminum and a stylish powder coating offer durability and style. Suitable for almost all handlebar sizes, it provides flexibility and easy installation.

• Aluminum Construction The handlebar riser is made of high-quality aluminum and offers a lightweight yet robust construction for long-lasting durability.
• Compatibility This handlebar riser is compatible with most 22 mm and tapered 28.6 mm handlebars, as long as the clamping is straight and the routing has been tested in the ABE.
• Easy Installation The handlebar riser is effortlessly screwed under the handlebar without the need to extend the cables or brake lines.
• Stylish Powder Coating The powder-coated surface gives the handlebar riser an appealing look while protecting it from weather influences.
• Dimensions and Weight The handlebar riser is available for both 22 mm and 28 mm handlebars, with dimensions of 28 x 56 mm and 30 x 65 mm, respectively. It weighs approximately 350 g.
• With ABE For most models, an ABE is available, which must be carried during the ride. Registration in the vehicle documents is optional.

Detailed Product Description:

SW-Motech Handlebar Riser

A higher handlebar usually results in a more upright seating position, significantly increasing comfort.

Details:

• made of aluminum
• powder-coated for high durability
• easily screwed additionally under the handlebar
• raises the handlebar position by the value specified in the article name/selection field
• compatible with almost all models with 22 mm or tapered 28.6 mm handlebars if the clamping is straight
• where the routing has been tested can be found in the attached ABE (the respective marking in the ABE can be found in the article name/selection field - e.g., PP or RR)
• the length of the cables and brake lines usually does not need to be extended if the height is listed for the model in the ABE - however, a slightly different routing may be necessary
• includes a matching stylish clamp for the handlebar

Dimensions (approx.):
Width x Length for 22 mm handlebar: 28 x 56 mm
Hole distance of the mounting for 22 mm handlebar: 29-37 mm
Width x Length for 28 mm handlebar: 30 x 65 mm
Hole distance of the mounting for 28 mm handlebar: 37-46 mm
Weight: 350 g

Approval (in Germany):
With ABE (except for the 50 mm riser!!)
The supplied ABE booklet must be carried during the ride.
Registration in the vehicle documents is possible for convenience reasons but not necessary.
For models not listed here, the handlebar riser can be registered as an individual approval by TÜV (old federal states) or DEKRA (new federal states) at the discretion of the inspector.
CAUTION: since the 50 mm riser almost always requires changes to the cables and lines, this size does not have an ABE - here the handlebar riser can only be registered as an individual approval by TÜV (old federal states) or DEKRA (new federal states) at the discretion of the inspector

For our Swiss customers:

Please note that in Switzerland, road legislation does not correspond to the EU. A clarification for approval for the Swiss motorcycle vehicle inspection must be clarified at the store/online shop before ordering. Technical articles that are rejected for registration cannot be returned. Costs may arise for issuing a necessary Swiss certification if the goods were not purchased in Switzerland.

Price per pair