battery charger PM3500, 6/12V 3,5A, for lead acid+Lithium

Description

Hi-Q Tools Battery Charger PM3500 Canbus, 6/12V 3.5A, for lead-acid and lithium batteries

CANBUS-enabled battery charger for 6- and 12-volt lead-acid batteries (WET, MF, AGM and Gel) AND Lithium LiFePo4 batteries.
You can use this charger to recharge the battery when needed or leave it on for extended periods of time (for example, over winter), thus extending battery life.
Also is suitable for batteries of vintage cars, cars, campers, jet skis, lawnmowers, snowmobiles, etc.

Details

• with a charger so you can charge almost every starter battery on the market
• future-proof: even if you have a motorcycle with a (standard?) lithium battery, you can continue to use the charger
• after switching on the mode button, it automatically detects whether a lithium, 6- or a 12-volt battery is connected
• at 12 volts, it is still possible to choose whether a small battery with reduced maximum charging power (0.9A) or an AGM battery with a special charging cycle is connected as an alternative to normal charging
• it checks the charging status of the battery and automatically starts the optimal charging process or the freshness-keeping mode
• built-in battery desulfator to restore used batteries. It can also reactivate undamaged, discharged 2-volt batteries
• on most models with CANBUS, also suitable for connection to the original on-board plug socket (for example, for BMW, Ducati, Triumph and Harley-Davidson) - you may need a suitable adapter (see options)
• from plugging it in and forgetting to use the vehicle - the charger does all there is in between
• includes removable crocodile clips which are attached to eyelets that can also be screwed directly to the battery terminals alternatively
• this is particularly functional if the battery is difficult to reach for
• the connection to the charger is made through an X-Connect plug - this also allows for the connection of further accessories (see options)
• if the X-Connect socket is screwed firmly to the battery, it can be closed with a rubber cover
• the housing can be connected via two holding eyelets, e.g., fixed to the wall (inside diameter 4 mm)
• extra long cables to operate independently of the socket position
• input voltage 100 V-240 V AC, 50-60 Hz, maximum consumption 60 watts
• charging current up to 3500 mA - suitable for batteries up to 120 Ah, freshness mode also for larger batteries
• degree of protection: IP65

Dimensions (approx.):
Length x width x height housing: 193 x 69 x 48 mm
Wide crocodile clips metal/plastic: 12/15 mm
Cable length device to outlet: 200 cm
Cable length device to X-Connect plug: 145 cm
Cable length Connect plug to battery connection grommets: 56 cm
Cable length Connect plug to tip crocodile clips: 64 cm
Ø eyelet: 6.5 mm (M6)
Weight: 715 g

Options

• additional battery connection cable with X-Connect socket and crocodile clips as already included in the delivery for other vehicles (order number 50020000920)
• battery connection cable with X-Connect socket and integrated LED charging status indicator (order number 50020000921)
• adapter for charging via existing DIN power sockets (eg., BMW) or cigarette lighter socket with X-Connect socket (order number 50020000923)
• extension cable with X-Connect plug and socket (order number 50020000922)
• ATTENTION:the separate X-Connect accessory is available from April 2019!
• charge status display via app on the smartphone or tablet (order number 50020000570)
• cable distribution set if there are already too many connections directly to the battery or if their poles are of difficult access (order number 50220000550)

Price per item

WEEE-Reg.-No. DE 33922893