Hashiru lasher relay adjustable 12V 0,1-150W 3 pole (also for LED)

Description

Product Description: Hashiru Adjustable Flasher Relay 12V 0.1-150W 3-pin (also for LED)

The Hashiru Adjustable Flasher Relay 12V 0.1-150W 3-pin (also for LED) offers flexible adjustment of the flash frequency. Ideal for LED and conventional indicators, easy to install.

• Individual Adjustment of Flash Frequency: With the rotary knob, you can individually adjust the flash frequency to your indicators, whether LED or 21W indicators.
• Universal Applicability: This flasher relay fits almost all motorcycles with original 3-pin flasher relays.
• Easy Installation: Replacement is uncomplicated if the pin assignment matches the original. If the assignment differs, you can lay additional cables.
• Technical Variety: Works at 12V for 0.1-150W and 0.02-20A, making it ideal for a wide range of indicators.
• Compact Design: The dimensions of 30x30x30mm and a weight of only 21g make it a space-saving and lightweight companion.

Detailed Product Description:

Hashiru Adjustable Flasher Relay 12V 0.1-150W 3-pin (also for LED)

The flash frequency can be individually adjusted to the used indicator via the rotary knob!
This means: Whether you are using just two LED indicators with extremely low power consumption or good old 21-watt indicators with hazard lights, the flash frequency will no longer be too fast or too slow.
You can simply set it to the allowed 90 pulses (± 30 pulses) per minute!

Details:

• when the original is defective or the flash frequency is too high with accessory indicators
• universally usable for almost all motorcycles with original 3-pin flasher relays
• easiest replacement if the original has the same pin assignment
• if the assignment differs, additional cables may need to be drawn
• 12 volts, for 0.1-150 watts, 0.02-20 A
• WARNING: There are a few models where the vehicle's electrical system prevents the desired reduction of the flash frequency via the relay - in this case, resistors must be used for this purpose!

Pin Assignment:
left: B = plus
middle: L = flashing plus output
right: E = ground

Dimensions (approx.):
Width x Height x Depth without rotary knob and plug: 30 x 30 x 30 mm
Height x Diameter of rotary knob: 11 x 6 mm
Width x Length of flat connector: 6.5 x 12 mm
Weight: 21 g

Price per piece