SW-MOTECH tail bag/luggage roll Drybag 180 waterproof 18 liters

Product Description: SW-MOTECH Tail Bag/Drybag 180 Waterproof 18 Liters

The SW-MOTECH Tail Bag/Drybag 180 Waterproof 18 Liters offers a robust, waterproof solution for your motorcycle adventure. With a universal fit and clever closure system, it reliably accompanies you on every tour. The bag ensures order and safety, no matter the weather.

• Waterproof Tarpaulin: The bag is made of extremely durable tarpaulin, coated with PVC on both sides. This keeps your luggage dry and secure in any weather.
• Universal Fit: With four fastening straps, the tail bag fits almost all motorcycles, scooters, and quads. This gives you flexibility, no matter what vehicle you use.
• Practical Roll Closure: The crosswise Velcro and roll closure, secured by side straps, allows for quick and easy storage of your luggage.
• Combinable Design: Thanks to the click fasteners, an additional drybag can be securely attached, ideal for longer trips, with a maximum of two bags recommended for aerodynamic reasons.
• Reflective Inserts: The bag offers additional safety with reflective inserts that increase visibility in traffic.
• Optional Security: With order no. 70250500003, you can secure the bag with a lock to prevent theft. Paint protection film (order no. 60470101590 or 60470101790) protects your motorcycle from scratches.

Detailed Product Description:

SW-Motech Tail Bag/Drybag 180 Waterproof 18 Liters

Small waterproof tail bag made from extremely durable, particularly tear-resistant, and absolutely waterproof tarpaulin (double-sided PVC-coated 500D polyester).

Details:

• Universal fit for almost all motorcycles, scooters, quads - includes 4 fastening straps
• The large main compartment is tightly closed with a crosswise Velcro/roll closure and secured with side click straps
• Small insert pocket with waterproof zipper for small items you may need quick access to
• A special feature allows another drybag to be securely attached to these click fasteners on the drybag - for aerodynamic reasons, a maximum of two tail bags should be combined
• Reflective inserts for better visibility
• Includes a click-on shoulder strap
• 4 loop straps in click fasteners provide reliable support for the bag on almost any seat and luggage racks

Dimensions (approx.):
18 liters of storage space
Width x Height x Depth outside: 390 x 340 x 200 mm
Width x Height x Depth inside: 340 x 200 x 195 mm
WARNING: these are not static dimensions - the values can change due to loading and the flexibility of the material!
Width x Height outer pocket inside: 295 x 165 mm
Maximum length x width of fastening straps: 750 x 25 mm
Maximum length x width of shoulder strap: 1400 x 25 mm
Weight: 780 g

Options:

• Security lock to secure the bag to the motorcycle (order no. 70250500003)
• Paint protection film (order no. 60470101590 or 60470101790) can also protect sensitive parts from rough dirt
• With the luggage retaining strap pair, the bags can be attached to the license plate mounting (order no. 70320000000)

Approval:
Tail bags do not need to be approved, therefore they do not require any test marks, reports, or ABEs.

Price per piece

Universal Mounting Tail Bag:

• Place the bag on the seat or luggage rack as desired
• Always maintain at least 5 cm distance from the exhaust and its exhaust stream - this applies to the bag as well as the fastening straps
• Initially route the front straps (to frame tubes, footrest holders, etc.) so that neither your freedom of movement is restricted nor any non-load-bearing parts (e.g., rear fairing) are subjected to excessive stress
• Then only tighten them enough to hold the position of the bag and prevent it from slipping backward significantly
• Individually find load-bearing attachment points for the rear fastening straps on each motorcycle
• These are usually the license plate holder, grab handles, frame tubes, turn signal mounts (if stable enough), etc.
• The fastening straps can be attached independently on the right and left - if this is not possible, you can also connect them to create a continuous strap from right to left - usually routed between the license plate and its holder or the splash guard
• Optional holders (70320000000) can also be screwed to the license plate mounting towards the rear wheel (please do not place them on the visible side of the license plate as it would otherwise be covered) - this provides two excellent lashing points
• Again, ensure that nothing is pinched or under too much tension
• Then tighten the two fastening straps only enough so that the bag is not yet fully secured
• Check and, if necessary, correct the desired position of the bag
• Only then evenly tighten all 4 straps so that the bag sits securely and cannot slip even when loaded
• Secure the strap ends against fluttering
• Always gradually increase speed cautiously on the first rides or with new loads