Highsider LED indicator/navigation light pair Proton Two M8 Ø12mm

Product Description: Highsider LED Indicator/Position Light Pair Proton Two M8 Ø12mm

The Highsider LED Indicator/Position Light Pair Proton Two M8 Ø12mm significantly enhances your visibility. The universal design fits almost any motorcycle and offers a robust metal housing with tinted glass. Perfect choice for discerning motorcyclists.

• Integrated Position Light: Significantly improves your visibility while riding. The compact size does not affect the appearance of your motorcycle.
• Robust Metal Housing: Withstands the challenges on the road and offers durable protection with an appealing and modern design.
• Mounting Options: M8x1.25 thread with nut allows for easy and secure installation on your motorcycle. Versatile use.
• Technical Specifications: Operates with 12 volts, 3.6/1.5 watts, and 0.25/0.09A for indicator/position light. Ideal for effective and efficient use.
• Dimensions and Weight: With a width of 13mm, diameter of 12mm, and a length of 16mm, the set weighs only 20g. Perfect size for an unobtrusive design.

Detailed Product Description:

Highsider LED Indicator/Position Light Pair Proton Two M8 Ø12mm

Universal small direction indicators with integrated position light and tinted glass.

Details:

• the integrated position light provides significantly better visibility while riding 
• robust metal housing with tinted plastic glass
• mounting via M8x1.25 thread and nut 
• 12 volts, 3.6/1.5 watts, 0.25/0.09A (indicator/position light)

Dimensions (approx.):
Width without thread x Diameter x Length: 13 x 12 x 16 mm
Glass diameter: 11 mm
Diameter at the base: 12 mm
Thread length: 18 mm
Cable length: 36 cm
Ø Round plug sleeves: 3.5 mm
Weight: each 20 g

Cable Assignment:
yellow = indicator (+)
white = position light (+)
black = ground (-)

WARNING:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flashing frequency to an allowable level.

Options:

• with the adjustable resistor, use is possible even with almost all models with CAN-BUS (Order number 50220000640)
• the changeover switch module turns off the position light while the indicator is activated to increase its clear visibility (Order number 50220000650)
• if the legal distances cannot otherwise be maintained or if the license plate is simply in the way, additional necessary matching extensions for the indicator arm can be used (Order No. 50170400860, 50170400870, or 50170003561)
• for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if the installation is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models, there are matching adapter plates with which installation is then easily possible (Order No. 50170100000 and following)
• also available as a pure indicator (Order number 50170401260)
• also available as an indicator with integrated taillight (Order number 50160301620)
• also available as a pure position light (Order number 60290004540)

Approval:
With E-mark for front.
The indicators and position lights have an E-mark and do not require any further documentation.
They can therefore be installed without any problems, in accordance with installation regulations.

For motorcycles with E-approval (from around mid/late 90s), the following apply:
Minimum distance from indicator glass to indicator glass at the front: 240 mm
Minimum distance from indicator glass to headlight glass: 75 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility up and down: 15 degrees
Permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles that were put into circulation through individual approval, or outside the EU, different measurements may apply.

Price per pair