Highsider LED indicator/navi light pair Apollo Classic M8 alu

Product Description: Highsider LED Indicator/Position Light Pair Apollo Classic M8 Aluminum

The Highsider LED Indicator/Position Light Pair Apollo Classic M8 Aluminum impresses with its robust aluminum housing and powerful SMD technology. The combination of indicator and position light offers clear visibility and safety.

• Robust Aluminum Housing: The high-quality aluminum housing ensures durability and resistance, ideal for demanding motorcycle tours.
• SMD Technology: The powerful SMD LEDs provide maximum brightness for optimal visibility in traffic.
• COB Technology: The outer position light ring uses modern COB technology to ensure even and bright light distribution.
• Easy Installation with M8 Thread: Thanks to the M8x1.25 thread with nut, the indicator/position light can be securely and easily mounted on almost any motorcycle.
• Technical Specifications: With a power of 12 volts and 1/2 watt, the set offers efficient light output. The dimensions of 39 x 22 x 21.5 mm ensure a discreet integration.
• Compatibility with Accessories: Suitable adapter cables and extensions are available for adaptation to various motorcycles (Order No. 50170400860 and others).

Detailed Product Description:

Highsider LED Indicator/Position Light Pair Apollo Classic M8 Aluminum

Universal small direction indicators with integrated position lights for the front.

Details:

• robust aluminum housing
• mounting via M8x1.25 thread and nut
• powerful SMD with lots of power
• the outer position light ring with COB technology (Chip On Board) 
• 12 volts, 1/2 watt (indicator/position light)

Dimensions (approx.):
Width x Height x Depth without thread: 39 x 22 x 21.5 mm
Thread length: 18 mm
Cable length: 34 cm
Ø round plug sleeves: 3.5 mm
Weight: each 30 g

Cable Assignment:
yellow = plus indicator (+)
black = ground (-)
white = position light (+)

Options:

• if the legal distances cannot otherwise be maintained or simply the license plate is in the way, additional necessary suitable extensions for the indicator arm can be used (Order No. 50170400860, 50170400870 or 50170400871)
• for easier connection without changes to the cables of the original indicators, corresponding adapter cables are available for many manufacturers/models (Order No. 50170003460 and following  as well as 50170502000 and following), the position light must also be connected separately on your own
• if the mounting is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models, suitable adapter plates are available to allow mounting without problems (Order No. 50170100000 and following)
  also available as a version with integrated rear/brake light (Order No. 50160301440)

CAUTION:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Approval:
With E-mark for the front.
The indicators and position lights have an E-mark and require no further papers.
They can be installed without any issues, according to installation regulations.

For motorcycles with E-approval (from about mid/end of the 90s) the following apply:
Minimum distance from indicator glass to indicator glass at the front: 240 mm
Minimum distance from indicator glass to headlight glass: 75 mm
permissible mounting height: 350 to 1200 mm
geometric visibility inward/outward: 20/80 degrees
geometric visibility up and down: 15 degrees
permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles that have been put into circulation through individual approval, or outside the EU, different measurements may apply.

Price per pair