Highsider LED alu back light/flasher pair M10 Colorado black

Product Description: Highsider LED Aluminum Tail Light/Indicator Pair M10 Colorado Ø45mm

The Highsider LED Aluminum Tail Light/Indicator Pair M10 Colorado Ø45mm combines elegant appearance with impressive functionality. The solid aluminum housings provide durable protection. Available exclusively at POLO Motorrad.

• Powerful LED Technology: The LEDs provide powerful and clear light emission, ensuring excellent visibility both day and night.
• Integrated Brake and Tail Light: The combination of brake, tail, and indicator light eliminates the need for a central tail light, allowing for a cleaner look.
• Solid Aluminum Housing: Made from high-quality aluminum, the housings not only offer protection but also a sophisticated design that fits any motorcycle style.
• E-Mark: Equipped with an E-mark, the indicators, tail, and brake lights are approved for road use and require no additional paperwork.
• Flexible Mounting Options: The attachment is done via an M10x1.5 thread and nut, ensuring easy installation.
• Adaptable Options: Also available as pure indicators or without housing, ideal for various modifications. Order numbers for adapter cables and plates are included in the offer.

Detailed Product Description:

Highsider LED Aluminum Tail Light/Indicator Pair M10 Colorado Ø45mm

Brake/tail light and turn signal in one.

Details:

• the central tail light is eliminated
• solid aluminum housings
• attachment via M10x1.5 thread and nut
• powerful LED
• 12 Volt DC, 1/1/1 Watt (Indicator/Tail Light/Brake Light)

Dimensions (approx.):
Width without thread x Diameter x Depth: 68 x 45 x 71 mm
Glass diameter: 40 mm
Thread length: 27 mm
Cable length: 34 cm
Ø Round plug sleeves: 3.5 mm
Weight: each 166 g

Cable Assignment:
black cable = ground (-)
blue cable = plus (+) for indicator
yellow cable = plus (+) for driving light
red cable = plus (+) for brake light

WARNING:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash rate to an acceptable level.

Options:

• also available as pure indicators, e.g., for the front (Order numbers 50170401180, 50170401181)
• also available for installation without housing (Order number 50160301110)
• if mounting is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models, there are suitable adapter plates that allow for easy installation (Order number 50170100000 and following)
• for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order number 50170003460 and following as well as 50170502000 and following)
• to avoid having to change the vehicle's cables for the tail light to round plug sleeves, there are adapters to original plugs or for holding the bulb from the original tail light for many models (Order number 50160300960 and following)
• for some models with CAN-BUS onboard network, it may be necessary to additionally connect resistors to avoid error messages in the cockpit for a defective bulb (Order number 50220000360 and following)
• also usable for older models with a 6 Volt onboard network through the voltage converter (Order number 60121210060) - but please consult with your inspector beforehand, the tail light is only E-approved for 12 Volt, due to the age of the 6 Volt vehicles, this is usually not an issue

Approval:
With E-mark.
Indicators, tail, and brake lights have an E-mark and require no additional paperwork.
They can be installed without any issues, complying with installation regulations.

Price per pair