Hashiru LED running light indicatorpair ST01 M8

Product Description: Hashiru LED Running Light Indicator Pair ST01 M8

Experience innovative safety with the Hashiru LED Running Light Indicator Pair ST01 M8. The sleek indicators combine striking illumination and subtle aesthetics. A perfect companion for your motorcycle.

• Slim Housing: The sleek design with tinted glass integrates seamlessly into the look of your motorcycle without being intrusive when not in operation.
• Inside-to-Outside Running Light: The LEDs light up sequentially from inside to outside, not only providing a cool look but also increasing your visibility on the road.
• Increased Safety: The remarkable visibility of the indicators improves road safety as other road users notice you more quickly.
• Lightweight Plastic Housing: The durable housing made of lightweight plastic ensures stability and longevity without adding extra weight to your vehicle.
• Technical Details: Equipped with 12 bright LEDs, 12 volts, 2.7 watts, and an M8x1.25 thread, the indicators fit perfectly with most motorcycle models.
• Customization Options: For easy installation, there are matching adapter cables (Order No. 50170003460, 50170502000) and extensions for the indicator arm (Order No. 50170400860, 50170400870, 50170400871).

Product Description in Detail:

Hashiru LED Running Light Indicator Pair 01

Do you want your indicator to shine prominently when activated but be as inconspicuous as possible when not in use?
The slim housing with tinted glass and the bright running light combine these properties.

Details:

• when activated, the LEDs light up sequentially from inside to outside until all are lit, then start again from the beginning
• the increased visibility results in a gain in safety
• lightweight plastic housing
• mounting via M8x1.25 thread and nut
• 12 bright LEDs
• 12 volts, 2.7 watts

Dimensions (approx.):
Width x Height x Depth without thread: 76 x 11 x 20 mm
Length x Width of base: 22 x 13 mm
Thread length: 19 mm
Cable length: 35 cm
Ø Round plug sleeves: 3.5 mm
Weight: 20 g each

Cable Assignment:
yellow = positive indicator
black = ground

WARNING:
When using LED indicators on vehicles that originally do not use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Options:

• if the legal distances cannot be maintained or if the license plate is simply in the way, additional necessary matching extensions for the indicator arm can be used (Order No. 50170400860, 50170400870, or 50170400871)
• for easier connection without changes to the cables of the original indicators, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if the installation is to be done in place of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates with which installation is then possible without problems (Order No. 50170100000 and following)

Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require any further documents.
They can therefore be installed without further ado, in accordance with the installation regulations.

For motorcycles with E-approval (from about mid/late 90s) the following apply:
Minimum distance between indicator glass to indicator glass front/rear: 240/180 mm
Minimum distance between indicator glass to headlight glass: 75 mm
Maximum distance from rear indicator to outermost end of the rear: 300 mm
Permissible installation height: 350 to 1200 mm
Geometric visibility inwards/outwards: 20/80 degrees
Geometric visibility up and down: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles that were put into circulation through individual approval, or outside the EU, different measurements may apply.

Price per pair