Givi tail bag Easy Bag 22-26 liters

Product Description: Givi Tail Bag Easy Bag 22-26 Liters

Discover the Givi Tail Bag Easy Bag 22-26 Liters, which is suitable for almost all motorcycles thanks to its universal fit and adjustable volume. This bag combines functionality with robust design and offers generous storage space. Enjoy effortless travel with a stable companion.

• Shape-stable tail bag: The Givi tail bag is thermoformed and retains its shape even under demanding conditions, ideal for adventures on any terrain.
• Adjustable volume: Thanks to the all-around zipper, the volume can be varied from 22 to 26 liters, allowing you to flexibly respond to different loading requirements.
• Integrated rain cover: The pull-out waterproof rain cover offers reliable protection for the contents in bad weather, so you are always prepared.
• High-strength material: Made from 1200D/PVC polyester and EVA, the bag impresses with its durability and scratch-resistant PU coating.
• Universal attachment: The bag can be easily attached to almost any motorcycle with four loop straps, while the lashing strap provides additional support.
• Accessory options: Secure the bag and its contents additionally with a security lock (Order No. 70250500002) or protect sensitive parts with paint protection film (Order No. 60470101590).

Detailed Product Description:

Givi Tail Bag Easy Bag 22-26 Liters

Shape-stable thermoformed tail bag suitable for most seats and luggage racks.

Details:

• Universal fit for almost all motorcycles, scooters, quads
• Very accessible main compartment, adjustable in height and thus in volume via an all-around zipper
• With mesh pocket inside the lid
• Two side pockets offer space for small items like wallet, keys, phone, etc.
• Integrated, pull-out waterproof rain cover when needed
• Lashing strap on the underside to easily and securely attach the bag to a seat or luggage rack
• The universal attachment is done via four loop straps in double-D rings
• Sturdy carrying handle
• Includes attachable shoulder strap
• High-strength 1200D / PVC polyester - EVA thermoformed, coated with scratch-resistant PU
• 95% Nylon + 5% PVC

Dimensions (approx.):
22-26 liters storage space (height adjustable)
Length x Width x Height outside: 290 x 280 x 250-290 mm
Length x Width x Height main compartment inside: 250 x 280 x 240-280 mm
Length x Width x Height mesh lid pocket inside: 250 x 250 x 70 mm
Length x Height x Width side pocket: each 180 x 110 x 15 mm
CAUTION: these are not static dimensions - due to loading and the flexibility of the material, the values can change!
Width x Height carrying handle: 115 x 28 mm
Maximum Length x Width shoulder strap: 1330 x 38 mm
Maximum Length (circumference) x Width seat strap: 500 x 20 mm
Maximum Length x Width fastening straps: 800 x 25 mm
Weight: 1100 g

Options:

• Security lock to secure the zipper of the main compartment (Order No. 70250500002)
• Security lock to secure the bag to the motorcycle (Order No. 70250500003)
• Paint protection film (Order No. 60470101590 or 60470101790) can additionally protect sensitive parts even with coarse dirt
• With the luggage retention loop pair, the bags can be attached to the license plate mounting (Order No. 70320000000)

Approval:
Tail bags do not need to be approved, therefore do not require test marks, reports, or ABEs.

Price per piece

Universal Mounting Tail Bag:

• Place the bag on the seat or luggage rack as desired
• Always keep at least 5 cm away from the exhaust and its exhaust stream - this applies to the bag as well as to the fastening straps
• The supplied straps can often be laid around the seat or luggage rack and thus securely fasten the bag
• If not, please proceed as follows:
• First lay the front straps (to frame tubes, footrest holders, etc.) so that neither your freedom of movement is restricted nor any non-load-bearing parts (e.g., rear fairing) are subjected to excessive stress
• Then tighten them only enough so that the bag holds its position and cannot slip back significantly
• Now individually look for load-bearing attachment points on each motorcycle for the rear fastening straps
• These are usually the license plate holder, grab handles, frame tubes, turn signal mounts (if they are stable enough), etc.
• The fastening straps can be attached independently of each other on the right and left - if this is not possible, they can also be connected to create a continuous strap from right to left - usually laid between
  the license plate and its holder or the splash guard
• Optional holders (70320000000) can also be screwed to the license plate mounting towards the rear wheel (please do not position on the visible side of the license plate as it would otherwise be covered) - this provides two excellent lashing points
• Also make sure that nothing is pinched or placed under too much tension
• Then tighten the two fastening straps only enough so that the bag is not yet fully secured
• Check and correct the desired position of the bag again if necessary
• Only then tighten all straps evenly so that the bag sits stably and cannot slip even when loaded
• Please secure the strap ends against flapping
• Please generally always increase speed cautiously on the first rides or with new loads