Baas Bikeparts board socket USB 2,1A USB7 with switch

Product Description: Baas Bikeparts Onboard Socket USB 2.1A USB7 with Switch

Experience the freedom of charging your electronic devices on the go with the Baas Bikeparts onboard socket USB 2.1A USB7 with switch. The spring-loaded cover protects against splashing water, while the clever on/off switch saves energy. Ideal for GPS, smartphones, and more.

• USB onboard socket with spring flap cover: The onboard socket comes with an automatically closing spring flap cover that protects your socket from dirt and water when not in use.
• Conversion from 12 volts to 5 volts: Converts the 12-volt input voltage to 5 volts, providing the perfect voltage for all USB standard devices.
• LED charging indicator: An integrated LED indicator above the switch shows you the charging readiness, so you always know when your device is being powered.
• Flexible mounting options: With an angle bracket for mounting on handlebars, frame tubes, or screwing on, you can customize the onboard socket to your needs.
• Robust protection and easy installation: The encapsulated back provides protection against water and dirt, while the installation options allow for easy installation with a 27 mm hole.
• Optional handlebar clamping: If needed, a robust clamping for handlebars with diameters of 22, 25.4, and 28 mm can be optionally ordered (order number 50220000570).

Detailed Product Description:

Baas Bikeparts Onboard Socket USB 2.1A USB7 with Switch

USB onboard socket with automatically closing spring flap cover and integrated on/off switch so that power is only supplied when needed.

Details:

• with LED indicator for charging readiness above the switch
• for operating and charging GPS, smartphones, or cameras as well as other electronic devices with USB plugs
• converts the 12-volt input voltage to 5 volts for the USB standard
• maximum 2.1 A charging current
• the spring-loaded cover closes the socket when not needed, thus protecting it from dirt and splashing water
• flexible mounting
• with angle bracket for mounting on handlebars, frame tubes, or screwing on
• can be installed in fairings or other surfaces, requiring only a hole with a 27 mm diameter at the appropriate location
• is securely clamped by the large nut on the bracket or at the installation location
• very well protected against water and dirt due to the encapsulated back
• includes an optionally usable 7.5 fuse
• cable with ring terminals for direct connection to the battery

Dimensions (approx.):
Diameter head: 36 mm
Cover length with hinge: 43 mm
Height head with cover above installation level/from bracket: 8 mm
Installation depth/depth from holding angle: 53/51 mm
Installation diameter: 27 mm
Width x height holding angle: 36 x 32.5 mm
Ø Screw/cable tie holes in holding angle: 4 mm
Distance holes center/center in width/height: 25.4/22 mm
Width holding angle from handlebar: 39 mm
Cable length: 1500 mm
Cable cross-section: 1 sq mm
Inner diameter ring terminals: 6.5 mm
Weight: 76 g

Connection:
red = positive +
black = ground -

Options:
If you want to attach the socket more solidly to the handlebar, there is an optional robust clamping (ZAH) suitable for handlebars with diameters of 22, 25.4, and 28 mm (order number 50220000570).

Approval:
Onboard sockets do not need to be approved, therefore no test marks, reports, or ABE's are required.

Price per piece