ABM Streetbike 0239 aluminium handlebar 22 mm

Product Description: ABM Streetbike 0239 Aluminum Handlebar 22mm

Experience a new dimension of riding comfort with the ABM Streetbike 0239 Aluminum Handlebar 22mm. This high-quality aluminum handlebar guarantees stability and precision. Exclusively available at POLO Motorrad, it offers a sporty and relaxed seating position.

• High-strength aluminum tube: Made from robust aluminum with a strong wall, this handlebar offers exceptionally high stability and durability for every ride.
• Brushed and anodized: The high-quality anodizing ensures long-lasting durability and gives the handlebar an appealing look that seamlessly integrates into your motorcycle's design.
• Knurling and scaling: Knurled in the clamp area and scaled in between, the handlebar allows for easy and precise alignment for perfect handling.
• Flatter than superbike handlebars: The flat design of the handlebar provides more load on the front wheel, increasing grip and reducing the tendency for unwanted wheelies.
• Dimensions and weight: With a width of 757 mm and a weight of 560 g, the handlebar offers the ideal balance between width and lightness. The outer diameter is 22 mm.
• Easy mounting options: Matching accessories are available, including templates and handlebar ends, for secure mounting and individual customization.

Product Description in Detail:

ABM Streetbike 0239 Aluminum Handlebar 22mm

Is the original handlebar too narrow or simply too high for you?
A normal superbike handlebar too high and too angled?
This flat handlebar type 0239 offers a comfortable width for a sporty relaxed seating position.

Details:

• high-strength aluminum tube with strong wall for high stability
• brushed and high-quality anodized for long-lasting durability
• with knurling in the clamp area and scaling in between for easy alignment
• significantly flatter than a "normal" superbike handlebar
• thus bringing more load on the front wheel
• this results in more grip and reduces the tendency for unwanted wheelies

Dimensions (approx.):
Width outer/inner edge: 757/742 mm
Height depending on positioning: 64-83 mm
Back sweep depending on positioning: 76-112 mm
Maximum width in clamp area: 166 mm
Outer diameter 22 mm
Inner diameter 12 mm
Weight: 560 g

Options:

• Template for safe installation of holes for the securing pin against twisting of the handlebar switches (Order number 50180808000)
• matching ABM handlebar ends stashCap (Order No. 60490400000 to 60490400050), shortCap (Order No. 60490400060 to 60490400065)
• matching ABM lever protectors (Order No. 60490401000, 60490401001)
• matching Hashiru handlebar ends (Order No. 60490000060 to 60490000066)

Approval (in Germany):
With ABE for many models (see attached PDF).
The supplied ABE booklet must be carried during the ride.
Registration in the vehicle documents is possible for convenience, but not necessary.
ATTENTION: If your model is not listed in the supplied ABE, it will be used as a TÜV report - then a presentation at TÜV/Dekra is necessary immediately after installation to obtain confirmation of correct installation and thus approval by individual acceptance according to §19.2.

Price per piece

Installation Instructions:

• The installation of the handlebar is only possible on motorcycles with appropriate risers with a handlebar clamp of Ø22.2 mm.
• All lines and cables must be routed so that they are kink- and tension-free during all steering and suspension movements and have sufficient clearance from chafing points.
• The brake hoses must not have a bending radius of less than 40 mm. At full steering lock, with the engine running, the engine speed must not change when turned to either side.
• It is important to ensure the proper functional position of all controls on the handlebar, even at full steering lock. The handbrake cylinder or the reservoirs must be in a functional working position.
• Ensure the free movement of the handlebar, its attachments, and sufficient steering lock to each side. The handlebar must move easily from lock to lock.
• After installation, a functional check of the brakes, clutch, throttle, lighting, and horn must be performed.

For our Swiss customers:

Please note that Swiss road legislation does not correspond to the EU. Clarification for approval for the Swiss motorcycle vehicle inspection must be done in-store/online before ordering. Technical articles that are rejected for registration can unfortunately no longer be returned. Costs may be incurred for issuing a necessary Swiss certification if the goods were not purchased in Switzerland.