CTEK Comfort Connect socket with charge indicator à installation

Description

Product Description: CTEK Comfort Connect Socket with Charge Indicator for Installation

The CTEK Comfort Connect Socket with Charge Indicator for installation offers you a practical solution for hard-to-reach batteries. With an LED charge indicator, you always have an overview. The easy installation makes it perfect for your motorcycle.

• Practical LED Charge Indicator: The 3-stage LED display of the CTEK Comfort Connect Socket reliably informs you about the charge status of your battery.
• Installation-Friendly Socket: This socket can be connected directly to the battery and can be easily installed in the cockpit or fairings.
• Compatibility with CAN-BUS: Even without a special charger, the CTEK Comfort Connect Socket with Charge Indicator is compatible with models with a CAN-BUS electrical system.
• Robust Materials: With its rubber cap and sturdy installation housing, the CTEK Comfort Connect Socket is particularly durable and weather-resistant.
• Technical Details: The socket with M8 ring terminals fits optimally to your battery and offers a cable length of 146cm for flexible installation.
• Expansion Options: Use the Comfort Connect extension cable or the adapter for Tamiya to adapt the socket to your needs.

Detailed Product Description:

CTEK Comfort Connect Socket with Charge Indicator for Installation M8

Practical socket with LED charge indicator for direct connection to the battery terminals and for installation in the cockpit or fairings.

Details:

• Comfort Connect socket with rubber cap in installation housing
• can usually be routed so that the CTEK charger can be installed in an easily accessible area due to the long cable
• particularly practical when the battery is hard to reach
• the M8 ring terminals are mounted on the battery
• therefore, no special charger is necessary even for models with a CAN-BUS electrical system
• the 3-stage LED display reliably indicates how fully the battery is charged
• these are the following indicators (battery at rest, engine and consumers are off)
• green: Battery is full and does not need to be charged (battery voltage higher than 12.85 V)
• yellow: Battery is partially discharged and needs to be charged (battery voltage between 12.4 V and 12.85 V)
• red: Battery is empty, must be charged (battery voltage lower than 12.4 V)
• Note: Only for CTEK 12-volt chargers with a charging current of 0.8-10A (these are all motorcycle-specific) and may only be used with these.
• with integrated 15A fuse

Dimensions (approx.):
Length x Width x Height Socket outside: 43 x 24 x 45 mm
Length x Width x Depth Installation dimension (fairing cutout): 32.5 x 21 x 32 mm
Ring terminals M8 (Ø 8.5 mm)
Cable length: 146 cm
Weight: 105 g

Options:

• also available as a version for loose installation (Order number 50020000400)
• the Comfort Connect extension cable (Order number 50020000530) allows the positioning of the socket even further away from the battery
• the counterpart with cigarette lighter socket on the other side (Order number 50020000420) allows charging or operating corresponding devices via this socket
• with the adapter for Tamiya, other chargers (e.g., CTEK old system) or other parts can be connected (Order number 50020000540)
• cable distribution set if too many connections are already directly on the battery or their terminals are hard to reach (Order number 50220000550)

Price per piece