satnav bracket NH1/12 for nearly all handlebar clamp

Description

Berni’s GPS bracket NH1/12 for nearly all tubular handlebars

Universal fit for practically all models with a one-piece tubular handlebar.
It is mounted simply in the place of one of the M8 screws on the handlebar clamp.

The lower part consists of CNC-milled aluminium, the black part is polyamide plastic.

Highly adjustable:
1. bracket can be turned into any position for attachment 
2. the upper and lower struts of the bracket can be set at up to a 90° angle 
3. the mounting plate can be turned and fastened in any position
This makes it possible to find a position for the GPS so that it does not obscure anything relevant in the cockpit but still remains adequately visible – on practically every motorbike.

The rotation is secured firmly by means of screws.
This also provides a higher level of anti-theft protection than with the RAM Mount systems.

The mounting plate has slot holes making it compatible with the original brackets of all standard motorbike GSP devices (TomTom, Garmin, etc.).
For devices that have a mounting for a claw plate, the click adaptor may be necessary.
With our waterproof GPS bags you can also attach and use a number of other devices (e.g. car GPS devices) with no problem at all.
With the special bags also suitable for smartphones, etc.
This bracket can, of course, also be used for mounting other kinds of devices (e.g. sport cameras) as required. 

This GPS bracket can also be attached at a number of other points with M8 screws.

The most standard M8 fine-thread (1.25) screws are supplied.
The handlebar clamp must have sufficient room for a screw head with a diameter of 14 mm.
The variable dimensions are:
Height 50 to 105 mm
Width 54 mm
Depth 45 mm

With TÜV report!