Rizoma LED running light indicator Vision M8 FR130

Product Description: Rizoma LED Sequential Turn Signal Vision M8 FR130

The Rizoma LED Sequential Turn Signal Vision M8 FR130 offers state-of-the-art LED technology for excellent visibility. Thanks to the sequential lighting effect, safety is significantly increased. Its elegant aluminum housing is lightweight and robust.

• State-of-the-art LED technology: Equipped with extremely bright LEDs, the turn signal ensures impressive visibility and increased safety on the road.
• Sequential lighting effect: The LEDs light up from the inside out, providing a clear and noticeable directional indication.
• Visible from all angles: Light emissions to the front and rear make the turn signal visible from all angles, enhancing its visibility.
• Elegant aluminum housing: The turn signal combines lightness with robustness and gives your motorcycle a stylish look.
• Technical details: The turn signal operates with 12 volts DC and includes 5 high-luminosity SMDs. Mounting is done via an M8x1.25 thread.
• Dimensions and weight: 75x14x16 mm, with a thread length of 20 mm and a weight of 32 g without mounting material.

Detailed Product Description:

Rizoma LED Sequential Turn Signal Vision M8 FR130

Very bright sequential direction indicator with sequentially lighting LEDs (so-called running effect) for increased safety through better visibility.

Details:

• extremely bright thanks to state-of-the-art LED technology
• when activated, the LEDs light up sequentially from the inside out until all are lit, then start again from the beginning
• light emissions to the front and rear make the turn signal fully visible from all angles
• increased visibility results in a gain in safety
• elegant, robust, and lightweight aluminum housing
• with rubber base against vibrations for long service life
• the necessary parts to bring the flashing frequency to an acceptable level if the original turn signal is 10 watts or 21 watts are included - for most models, no additional parts such as resistors are necessary
• mounting via M8x1.25 thread and nut
• 5 high-luminosity SMD
• 12 volts DC

Dimensions (approx.):
Width without thread x Height x Depth: 75 x 14 x 16 mm
Diameter at the base: 14 mm
Thread length: 20 mm
Cable length: 39 cm
Ø Round plug sleeves: 3.5 mm
Weight without mounting/connection material: 32 g

Cable assignment:
black = ground (-)
red = positive (+)

Options:

• if the legal distances cannot otherwise be maintained or if the license plate is simply in the way, additional necessary suitable extensions for the turn signal arm can be used (Order No. 50170003551 or 50170003561)
• for easier connection without changes to the cables of the original turn signals, there are corresponding adapter cables for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if the installation is to be done in place of the original turn signals, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates that make installation possible without problems (Order No. 50170100000 and following)
• for models where the adjustment of the flashing frequency with the supplied resistors does not work, or where resistors are not suitable due to space reasons, we recommend using the Flasher Kit 50170003453

Approval:
With E-mark.
Equipped with an E-mark and requires no further documentation.
It can therefore be installed without any issues, in accordance with installation regulations.

Price per piece