Hi-Q Tools battery charger PM3500, 6/12V 3,5A, for lead acid+Lithium

Product Description: Hi-Q Tools Battery Charger PM3500, 6/12V 3.5A, for Lead-Acid+Lithium

The Hi-Q Tools Battery Charger PM3500 is a versatile helper for almost all starter batteries and offers a future-proof solution for lead-acid and lithium batteries. Thanks to its CANBUS functionality and maintenance mode, the device can remain connected during extended periods of inactivity and extend the lifespan of your battery. Exclusively available at POLO Motorrad.

• CANBUS-enabled charger: Use it for safe charging of 6V and 12V lead-acid as well as lithium LiFePo4 batteries. It also offers a maintenance mode for extended periods of inactivity.
• Universal applications: Charge almost any starter battery, including classic cars, cars, RVs, jet skis, and more. One device for all your vehicles.
• Intelligent charging process: The device recognizes the battery type and automatically starts the optimal charging process or maintenance mode to optimally care for the battery.
• Flexible connection via X-Connect: The X-Connect plug allows for easy connection of additional accessories. Convenient for hard-to-reach batteries.
• Practical design: With removable crocodile clips and extra-long cables, the device is flexible to use. It can also be easily mounted on the wall.
• Technical data: The charger operates with an input voltage of 100-240V AC and a maximum charging current of 3500mA. It is suitable for batteries up to 120 Ah.

Detailed Product Description:

Hi-Q Tools Battery Charger PM3500 Canbus, 6/12V 3.5A, for Lead-Acid and Lithium

CANBUS-enabled charger with maintenance mode for 6 Volt and 12 Volt lead-acid batteries (WET, MF, AGM, and Gel) and lithium LiFePo4 batteries.
You can use this charger to charge the battery as needed or leave it connected during extended periods of inactivity (e.g., over the winter) to extend the battery's lifespan.
Also suitable for batteries in classic cars, cars, RVs, jet skis, lawnmowers, snowmobiles, etc.

Details:

• with one charger, you can charge almost any starter battery on the market
• future-proof: even if you eventually have a motorcycle with a (factory-installed?) lithium battery, you can continue to use the charger
• via the mode button, you can set whether a 12 Volt, 6 Volt, or a lithium battery is connected
• at 12 Volts, you can also select whether, as an alternative to normal charging, a small battery with reduced maximum charging power (0.9A) or an AGM battery with a special charging cycle is connected
• it checks the battery's charge status and automatically starts the optimal charging process or the maintenance mode
• built-in battery desulfator for restoring used batteries, can also reactivate deeply discharged batteries from 2 Volts if no damage is present
• for most models with CANBUS, also suitable for connection to the original onboard socket (e.g., for BMW, Ducati, Triumph, and Harley-Davidson) - you may need an appropriate adapter (see options)
• so simply connect and forget until vehicle use - everything in between is done by the charger independently
• includes removable crocodile clips which are attached to ring terminals that can alternatively be screwed directly to the battery poles
• this is especially practical when the battery is hard to reach
• the connection to the charger is made via an X-Connect plug - this also allows the connection of additional accessories (see options)
• if the X-Connect socket is permanently screwed to the battery, it can be closed with a rubber cover
• the housing can be fixed to the wall via two mounting loops (inner diameter 4 mm)
• extra-long cables to act more independently of the socket position
• input voltage 100V-240V AC, 50-60Hz, maximum consumption 60 Watts
• charging current up to 3500mA - suitable for batteries up to 120 Ah, maintenance mode also for larger batteries
• protection class: IP65

Dimensions (approx.):
Length x Width x Height of housing: 193 x 69 x 48 mm
Width of crocodile clips metal/with plastic: 12/15 mm
Cable length device to socket: 200 cm
Cable length device to X-Connect plug: 145 cm
Cable length connect plug to battery terminal rings: 56 cm
Cable length connect plug to tip of crocodile clips: 64 cm
Ø ring terminal: 6.5 mm (M6)
Weight: 715 g

Options:

• additional battery connection cable with X-Connect socket and crocodile clips as already included once in the delivery for more vehicles (Order number 50020000920)
• adapter for charging via existing DIN onboard sockets (e.g., for BMW) or cigarette lighter socket with X-Connect socket (Order number 50020000923)
• extension cable with X-Connect plug and socket (Order number 50020000922)
• charge level indicator via app on smartphone or tablet (Order number 50020000570)
• cable distribution set if there are already too many connections directly on the battery or their poles are difficult to access (Order number 50220000550)

Price per piece

WEEE Reg. No. DE 33922893