Fits these bikes
Wilbers Suspension Strut Type 642
Improved responsiveness and large reserves for good road adhesion resulting in great grip and comfort - for a clearly improved road position.
The equalising reservoir on the tube makes sure the absorption remains the same also with stronger loads (course, off-road, holiday tour, high temperatures).
It is surprising what is possible with these suspension struts - even with supposed good original supension elements.
- the setting buttons for the low- and high-speed-zone of the compression level, adjustable in 22 levels, are easily accessible from outside
- of course, the preload is infinitely adjustable and an extremely wide range of rebound settings are available using an open bleed mechanism with 22 clicks of adjustment
- due to the extremely wide setting zone the right system for normal street use, course, the world trip and all the other fields of application
- 642 with large 46 mm piston diameter
- the over-pressure safety valve prevents the shock from hydraulic blocking at high compression speed
- with equalising reservoir parallel to the suspension strut
- radial pistons, guidance for wet running and self-aligning bearings with PTFE guides
- Blueline comes with a blue spring and a red setting ring of the traction level, Black Line comes with a black spring and a silver setting ring
- for models with two suspension struts as TS version (twin shock) a pair of stereo suspension struts - view article denomination
- version +625 (view article denomination) = including hydraulic spring pretensioning with hand wheel for a quick and easy handling when changing crew/load often
- version +629 (view article denomination) = including manual height adjustment on the suspension strut fixing
- for homogenous road-handling it is recommended to use the suspension struts together with the Wilbers fork springs
- Wilbers supension struts are usually no stock goods, they are built on demand and have therefore a certain delivery time
With ABE type approval
-the delivered ABE booklet has to be carried along.
Does not require registration, but can be entered in your vehicle documentation for convenience reasons.
In case of a binding order in one of our stores, there are the following individualization options:
- Adjustment to your personal needs (free of charge) – if indicating driver's and passenger's weight (including equipment), preferred intended use (mostly solo, often in twos, with luggage, race circuit, country road etc.) and way of driving, the suspension struts are suitably constructed and adjusted. There's indeed a difference if a 60 kg person mostly drives alone or with the permissible total weight – spring rate and absorption are correspondingly chosen.
- Highering or lowering (without extra charge) is possible, if technically realizable. If it's not in standardly offered dimensions, the suspension struts are only delivered with an approval.
- If you don't find your model here, ask in one of our stores, they are available for nearly every motorcycle and quad, if necessary they can be manufactured according to specifications (where required with extra cost).
- The same is valid for hydraulic spring pretensioning and highering. Both is possible for most of the suspension struts, if they are not to find here (with extra charge).
Due to logistic reasons such individual constructions can not be delivered, the supension strut has to be ordered bindingly and picked up at the store.
Price per piece (only TS versions for 2 pieces).
For our Swiss customers:
Please note, that due to the Swiss traffic regulation you’ll need a valid allowance certificate which will be issued by our Swiss shop assistants and will NOT be delivered with the article.
Delivery via Click & Collect is not possible for this article
Item No. 60340001750
About the brandSuspension specialist Wilbers Products has been based in Nordhorn, Lower Saxony, on the Dutch border since 1985. Suspensions manufactured by Wilbers find their way from here to over 30 countries worldwide! Each shock absorber is a custom-made product, which is assembled by hand according to the modular principle. Only the very best materials from suppliers in Germany and Europe are used for the shock absorbers.