Shin Yo LED indicator pair Toledo M8 black, tinted glass

Description

Product Description: Shin Yo LED Indicator Pair Toledo M8

The Shin Yo LED Indicator Pair Toledo M8 offers you stylish and bright indicators for your motorcycle. With 12 LEDs, it ensures optimal visibility. The simple M8 mounting guarantees quick installation.

• Lightweight plastic housing: The Shin Yo LED Indicator Pair Toledo M8 features a robust yet lightweight plastic housing that saves weight on your motorcycle while providing maximum stability.
• Vibration-damping rubber base: The integrated vibration damping ensures a long service life and reliable operation, even under demanding riding conditions.
• Easy mounting with M8 thread: The mounting is very simple with an M8 x 1.25 thread and a nut. This allows for uncomplicated and stable installation on your motorcycle.
• Bright 12 LEDs: Equipped with 12 powerful LEDs, the indicator pair offers excellent visibility and increases safety on the road.
• Compact dimensions and low weight: The dimensions of 62 x 22 x 32 mm without thread and a weight of only 30 g make these indicators an unobtrusive yet effective addition to your motorcycle.
• Optional adapters and extensions: Adapter cables and extensions are available for a variety of models to simplify installation and comply with legal distances.

Detailed Product Description:

Shin Yo LED Indicator Pair Toledo

Stylish and Bright.

Details:

• lightweight plastic housing
• with rubber base against vibrations for long service life
• mounting via M8 x 1.25 thread and nut
• 12 bright LEDs
• 12 volts, 1.5 watts

Dimensions (approx.):
Width x Height x Depth without thread: 62 x 22 x 32 mm
Diameter at base: 14 mm
Thread length: 20 mm
Cable length: 27 cm
Round plug sleeves: 3.5 mm
Weight: 30 g each

Cable assignment:
yellow = positive indicator
black = ground

WARNING:
When using LED indicators on vehicles that do not originally use LED indicators, it may be necessary to replace the flasher relay and/or use resistors to reduce the flash frequency to an acceptable level.

Options:

• also available as a rear version with integrated brake/rear light (Order No. 50160301270)
• if the legal distances cannot be maintained or if the license plate is simply in the way, additional necessary matching extensions for the indicator arm can be used (Order No. 50170400860, 50170400870, or 50170400871)
• for easier connection without modifications to the cables of the original indicators, there are corresponding adapter cables available for many manufacturers/models (Order No. 50170003460 and following as well as 50170502000 and following)
• if the installation is to take place instead of the original indicators, their mounting is usually too large - for many manufacturers/models there are suitable adapter plates available that allow for easy installation (Order No. 50170100000 and following)

Approval:
With E-mark for front and rear.
The indicators have an E-mark and do not require any further documentation.
They can therefore be installed without further ado, in accordance with the installation regulations.

For motorcycles with E-approval (from around mid/late 90s):
Minimum distance between indicator glass to indicator glass front/rear: 240/180 mm
Minimum distance between indicator glass to headlight glass: 75 mm
Maximum distance of rear indicator to the outermost end of the rear: 300 mm
Permissible mounting height: 350 to 1200 mm
Geometric visibility inward/outward: 20/80 degrees
Geometric visibility upward and downward: 15 degrees
Permissible flash frequency: 60 to 120 cycles per minute
For older models, vehicles that have been individually approved, or non-EU countries, different dimensions may apply.

Price per pair