Rizoma Conus handlebar Drag Bar 28,6/22mm alu 755mm MA015B black

Description

Product Description: Rizoma Conus Handlebar Drag Bar 28.6/22mm Aluminum 755mm MA015

The Rizoma Conus Handlebar Drag Bar 28.6/22mm Aluminum 755mm MA015 offers a sporty seating position and optimized bending stability. Perfect for dynamic rides and high maneuverability.

• Tapered Aluminum Handlebar: The handlebar offers a diameter of 28.6 mm at the clamp and 22 mm at the grips, guaranteeing better bending stiffness compared to conventional handlebars.
• Dynamic Seating Position: Thanks to its shape and width of 755 mm, this handlebar supports a sporty, forward-oriented posture and improves maneuverability.
• Aluminum ERGAL 7075: Made of high-quality aluminum, the handlebar not only offers stability but also an anodized, durable surface.
• Adjustable Tilt Angle: The handlebar allows for an adjustment of the tilt angle by 10°, ensuring individual adaptation to your needs.
• TÜV Component Certificate: The handlebar is equipped with a TÜV component certificate, facilitating installation and use in public road traffic.
• Combined Options: Versatile combination with Conus adapters and risers, suitable for models with original 22 mm handlebars. Order numbers for installation are available.

Detailed Product Description:

Rizoma Conus Handlebar Drag Bar 28.6/22mm Aluminum 755mm MA015

Flat tapered aluminum handlebar with very low sweep (diameter at the clamp of 28.6 mm and at the grips of 22 mm).

Details:

• for a sporty, forward-oriented seating position
• significantly more bending stable than continuous 22 mm handlebars
• shape and width result in a dynamic seating position and good maneuverability
• made of Aluminum ERGAL 7075
• very high-quality anodized
• for models that already have a tapered handlebar as original
• with the additionally necessary conversion clamp blocks also for many models with continuous 22 mm thick original handlebars

Dimensions (approx.):
Width: 75.5 cm
Height: 0 mm
Adjustability of tilt angle: 10°
Outer diameter at grips: 22 mm
Outer diameter at clamp: 28.6 mm
Clamp width: 125 mm
Inner diameter for bar ends: 14 mm
Weight: ....

Options:

• Template for secure attachment of holes for the anti-twist pin of the handlebar switches (Order number 50180808000)
• universal Conus adapters, Conus risers, and Conus handlebar clamps as well as model-specific solutions from Rizoma are available in many variations if a continuous 22 mm thick handlebar is installed as original
• handlebar weights matching the inner diameter (not only from Rizoma) and Pro Guard lever protectors in various shapes and colors available
• also available are color-matching aluminum grips in several shapes

Approval (in Germany):
With TÜV component certificate.
A tester (TÜV, Dekra, etc.) must confirm the correct installation before operation in public road traffic.
This test confirmation must then be carried, similar to a general operating permit, during the ride.
At the next opportunity (i.e., next visit to the road traffic office for registration/deregistration/reregistration), it should be included in the registration papers.
For models not listed in the component certificate, the tester can register the handlebar and possibly the Conus adapter/riser through an individual acceptance.

For our Swiss customers:

Please note that road legislation in Switzerland does not correspond to the EU. A clarification for approval for the Swiss motorcycle vehicle inspection must be made in the store/online shop before ordering. Technical articles that are rejected for registration cannot be returned. Costs may arise for issuing a necessary Swiss certification if the goods were not purchased in Switzerland.

Price per piece

Installation Conditions and Instructions:

• All lines and cables must be routed so that they are kink and tension-free during all steering and suspension movements and have sufficient distance from chafing points. Brake hoses must not fall below a bending radius of 40 mm.
  At full steering lock, with the engine running, the engine speed must not change in either direction.
• It is important to ensure the functional position of all control elements on the handlebar, even at full steering lock. The master cylinder and reservoir must be in a functional position.
• Ensure the handlebar's freedom of movement, its attachments, and sufficient steering lock to each side. The handlebar must move easily from lock to lock.
• After installation, perform a functional check of the brake, clutch, throttle, lighting, and horn.