Hashiru Superbike handlebar 22mm 0229 alu 76x7,1cm anthracite

Description

Product Description: Hashiru Superbike Handlebar 22mm 0229 Alu 76x7.1cm

The Hashiru Superbike Handlebar 22mm 0229 Alu 76x7.1cm offers a perfect balance of stability and flexibility. With its high-quality anodization and central scaling, it ensures precise control.

• High-strength aluminum tube: The Hashiru Superbike Handlebar is made of robust aluminum with a strong wall, providing you with impressive stability.
• Brushed and anodized: For a long-lasting surface, the handlebar is brushed and high-quality anodized, making it resistant to weather influences.
• Central scaling: The precise central scaling makes it easy for you to achieve perfect alignment and offers an improved sense of control while riding.
• Handy and controllable: The handlebar makes most models more manageable and provides a fantastic sense of control for your motorcycle.
• Optimal dimensions: With its width of 761mm and a variable height of 71-122mm, it fits most handlebar mounts with a 22mm outer diameter.
• Approval with ABE: The handlebar is approved in Germany with ABE for many models, making installation and use particularly uncomplicated.

Detailed Product Description:

Hashiru Superbike Handlebar Alu 22mm 0229

Is your original handlebar too narrow or just too high?
This is the classic handlebar with a comfortable width for your sporty relaxed seating position.

Details:

• Made from high-strength aluminum tube with a strong wall for high stability
• Brushed and high-quality anodized for long durability
• With central scaling for easy alignment
• Makes most models more manageable and provides you with a great sense of control for the motorcycle
• Suitable for handlebar mounts for handlebars with a 22 mm outer diameter.

Dimensions (approx.):
Width outer/inner edge: 761/751 mm
Height depending on positioning: 71-122 mm
Bend backwards depending on positioning: 102-150 mm
Maximum width in the clamping area: 178 mm
Outer Ø: 22 mm
Inner Ø: 12 mm
Weight: 610 g

Options:

• Template for safe placement of the holes for the securing pin against twisting of the handlebar switches (Order number 50180808000)
• Matching Hashiru handlebar ends (Order No. 60490000060 to 60490000066)

Approval (in Germany):
With ABE for many models (see attached PDF).
The ABE booklet must be carried during the ride.
Registration in the vehicle documents is possible for convenience reasons but not necessary.
WARNING: If your model is not listed in the ABE, this is used as a TÜV report - then a presentation at TÜV/Dekra is necessary after consultation and immediately after installation to obtain confirmation of the correct installation and thus approval by individual acceptance according to §19.2.

Price per piece

Installation Instructions:

The installation of the handlebar is only possible on motorcycles that have appropriate risers with a handlebar clamp of Ø22.2 mm.
All lines and cables must be routed so that they are kink-free and stress-free during all steering and suspension movements, and there is sufficient distance to chafing points.
The brake hoses must not have a bending radius of less than 40 mm. At full steering lock, with the engine running, the engine speed must not change.
Attention must be paid to the functional position of all controls on the handlebar, even at full steering lock. The handbrake cylinder or reservoirs must be in a functional working position.
Attention must be paid to the free movement of the handlebar, its attachments, and sufficient steering lock on each side. The handlebar must move easily from steering stop to steering stop.
After installation, a functional check of the brakes, clutch, throttle, lighting, and horn must be carried out.

For our Swiss customers:

Please note that in Switzerland, road legislation does not correspond to the EU. Clarification for approval for the Swiss motorcycle vehicle inspection must be clarified in the store/online shop before ordering. Technical items that are rejected for registration cannot be returned. Costs may be incurred for issuing a necessary Swiss certification if the goods were not purchased in Switzerland.