Hashiru indicator Small 12V/H21 M10 long black, tinted VLHR

Description

Product Description: Hashiru Blinker Small 12V/H21 M10 long black, tinted glass

The Hashiru Blinker Small 12V/H21 M10 offers easy installation without electrical modification. Thanks to universal fit and tinted glass, it gives your motorcycle a modern look.

• Lightweight plastic housing: The durable housing provides protection and longevity without increasing the weight of your motorcycle. Ideal for sporty rides.
• M10x1.25 thread mounting: Secure and easy installation thanks to the standardized thread, ensuring stable attachment. No special tools required.
• 21-watt halogen bulb: Provides clear and bright visibility, enhancing road safety. Compatible with motorcycles that already use 21-watt blinkers.
• Tinted glass: Gives your motorcycle a modern and stylish look. Combines functionality with aesthetic design for a unique expression.
• Compatibility: No electrical changes when used with original 21-watt blinkers. This facilitates replacement and saves time during installation.
• Optional adapter and LED versions: Customize your blinker with accessories and expand your options. Adapter and LED options available under order numbers 50170003460 and 50170003370.

Detailed Product Description:

Hashiru Blinker 12V/H21 M10 Small long black, tinted glass

Universal turn signal with 21-watt halogen bulb for easy connection on models that also use 21-watt blinkers originally.

Details:

• lightweight plastic housing
• mounting via M10x1.25 thread and nut
• 12 volts, 21 watts halogen
• for vehicles that originally have 21-watt blinkers, NO electrical changes (resistors, different flasher relay, etc.) necessary
• installation note: The blinkers have ventilation holes on one side - please mount them so that they point downwards
• therefore, there are two different versions VRHL = suitable for front right and rear left, VLHR = suitable for front left and rear right

Dimensions (approx.):
Width without thread x Height x Depth: 88 x 28.5 x 39 mm
Length x Height at base: 22.5 x 20 mm
Thread length: 22 mm
Cable length: 18 cm
Ø Round plug sleeves: 3.5 mm
Weight: 47 g

Cable assignment:
Since with bulb, arbitrary!

Options:

• also available as a version with a longer arm (order number 5017000332 and following)
• also available as an LED version (order number 50170003370 and following)
• for easier connection without changes to the cables of the original blinkers, there are corresponding adapter cables for many manufacturers/models (order no. 50170003460 and following as well as 50170502000 and following)
• if mounting is to be done in place of the original blinkers, their mounting is usually too large - there are suitable adapter plates for many manufacturers/models, which make mounting possible without problems (order no. 50170100000 and following), if necessary, the hole of the adapter plate must be enlarged to M10
• replacement bulb 12 volts halogen 21 watts BAY9S (order number 50150000390)

Approval:
With E-marking for front and rear.
The blinkers have an E-marking and require no further documentation.
They can therefore be installed without further ado, in accordance with installation regulations.

For motorcycles with E-approval (from around mid/end of the 90s) the following apply:
Minimum distance blinker glass to blinker glass front/rear: 240/180 mm
Minimum distance blinker glass to headlight glass: 75 mm
Maximum distance rear blinker to the outermost end of the rear: 300 mm
permissible installation height: 350 to 1200 mm
geometric visibility inwards/outwards: 20/80 degrees
geometric visibility upwards and downwards: 15 degrees
permissible flashing frequency: 60 to 120 cycles per minute
For older models, vehicles that were put into circulation through individual approval, or outside the EU, different dimensions may apply.

Price per piece