Shin Yo LED Back Light/Indicator pair M8 Shorty Fin
Universal brake/ back light and direction indicators in one.
- The central back light has been dispensed with
- light plastic housing
- Rubber base against vibration for a long life
- Attachment via M8x1.25 threaded rod and nut
- Bright LED (4x for back/brake light, 3x for indicators)
- 12 volt DC, ... Watt (indicators/back light/brake light)
Glass width x height x depth: 50 x 18 x 24.5 mm
Total length with rubber shaft: 12 mm
Thread length: .. mm
Cable length: .. cm
Ø Round receptacles: 3.5 mm
Weight each .. grams
Black cable = Earth for indicator and back light
Blue cable = plus (+) for indicators
Yellow cable = plus (+) for back light
Red cable = plus (+) for brake light
If the statutory clearances cannot otherwise be maintained or if the number plate is simply in the way, additional matching extensions can also be used for the indicator arm (order no. 50170400860, 50170400870 or 50170400871).
When using LED indicators on bikes that originally did not use LED indicators, it may be necessary to change the indicator relays and/or resistors in order to reduce the flashing frequency to an acceptable level.
With E-mark approval.
Indicators, rear and brake light are E-mark approved and require no further documents.
They can easily be installed following the installation regulations.
Price per pair
- Sehr gute Blinker...