to the cart »

Interesting offers:

Wunderkind side number plate bracket AT for Rocker/Breakout

Order ID 60390760031
More Views

Wunderkind side number plate bracket AT for Rocker/Breakout

Order ID 60390760031
Shipping & delivery

Wunderkind Custom Side-mounted license plate holder

Cleans up the tail and gives a clear view of the tyre.


  • For side mounting on the rocker
  • Aluminium CNC milled and finished with BLACKPearl anodisation
  • Integrated LED lighting with concealed cables
  • One simply pushes the number plate from above into the frame and secures it by means of a number plate light screwed to the number plate panel
  • The number plate can be adjusted in the holder 3 steps in width and tilted up to thirty degrees
  • In the case of even large modifications the individual ideal position can be found


  • DE: for German number plates with a width of 180 mm and height of 200 mm
  • AT: for Austrian number plates with a width of 170 mm and height of 210 mm

In addition to this license plate carrier, an approved reflector must also be attached to the tail.
This can be done on your own independently of the license plate carrier, or directly on the number plate by means of the Wunderkind Rear Reflector Set (Order No. 60390761000).

Permit (in Germany):
With TÜV part certificate.
The tester (TÜV, Dekra, etc.) must certify the proper installation before use on public roads.
This test certificate must then be carried while driving, similar to the operating permit.
As soon as possible (that is, the next visit to the road traffic department for registration or change of address) this should be transferred into the registration documents.
In the case of models not listed in the certification, the registration must be by special approval as appropriate.
For permitted operation, the use of a reflector (not in the delivery) and number plate light with E-authorisation (included here in the delivery) is mandatory.

Price each includes model-specific customising kit.

For our Swiss customers:

Please note, that due to the Swiss traffic regulation you’ll need a valid allowance certificate which will be issued by our Swiss shop assistants and will NOT be delivered with the article.
You may also be interested in the following product(s)


Write Your Own Review

Qualitativ hochwertiger Kennzeichenhalter
Review by WernerW
Habe den Kennzeichenhalter an eine XL 1200 CX Roadster montiert. Die Verarbeitung des Kennzeichenhalters ist sehr hochwertig. Einzig der Sechskant der Achsmutter könnte etwas höher sein, damit die Stecknuss mehr Halt finden würde. Der Kennzeichenhalter hält bombenfest und ist variabel montierbar (man kann/muss die Befestigungslöcher selbst bestimmen und bohren). Die alternativen Bohrungen sind jedoch vormarkiert, so dass eigentlich nichts falsch gebohrt werden kann. Kabel sind zumindest am Halter selbst in einer Nut unsichtbar verlegbar. Für mein 2017er Modell gibt es allerdings noch kein Teilegutachten. Dieses Modell soll lt. Rückfrage beim Hersteller erst ab 2018 in das Gutachten aufgenommen werden. Lt. TÜV kann es aber durch Einzelabnahme eingetragen werden. Ich lass mich überraschen. (Posted on 8/15/2017)