Speed Brakes replacement brake hoses with steel braided sheath
Installation identical with the stock version or alternatively:
2-part x-over installation in the front: one hose goes from the handlebars to the right caliper, the other one goes over the fender to the left caliper
2-part direct installation in the front = each hose goes directly from the master cylinder on the handlebars to one of the brake calipers.
With ABE-approval or TüV parts certificate in the case of x-over installation.
In addition to unlimited durability, the hoses offer the following improvements compared to the original rubber hoses: Optimal pressure point even with prolonged load, shorter braking distance by increased control, less hand force required.
The connections can be rotated for mounting, first-class anodizing quality of the aluminum connectors ensures flawless installation in the coating, PTFE inner lining, all lines covered with a transparent protective coating, all connections made of aluminum with stainless steel compression.
V2A line in spring steel quality (pressure exceeds 1050 ATM).
Approx. 60% less weight.
The stock hollow screws can be used for installation and if necessary double hollow screws are included.
Matching M10x1.25 screws can also be ordered separately (article number 6032054 and following).