Koyo KT9B-BS 12 V/8 Ah maintenance-free battery
This battery features the quality of the brand, which also supplies original equipment to many motorbike manufacturers.
Before filling the battery, please check that it fits your vehicle (snugness of fit, dimensions, type, location of the poles) because batteries cannot be exchanged once filled.
The battery is supplied in a dry, pre-charged state. Please use the battery acid provided for filling.
Remove the protective film from the battery and detach the battery sealing strip from the acid. Pour in the acid and let it stand for about 30 minutes to enable the air to escape properly.
Place the sealing strip from the acid into the openings on the battery and seal it firmly. Install the battery and start the engine. In this state, the battery is not at full power (about 70%), but it will enable the engine to be started a number of times without any problems.
The battery will achieve full power during the first trip, or beforehand if a compatible motorbike charger is used (at least with automatic switch-off).
12 V, 8 Ah
Length x width x height = 149 x 70 x 105 mm
Terminals: positive on the left, negative on the right
Passt aber gar nicht