to the cart »

Interesting offers:

Banner Battery Classic 51814 12V, 18Ah with electrolyte pack

Order ID 50010600170
More Views

Banner Battery Classic 51814 12V, 18Ah with electrolyte pack

Order ID 50010600170
  • starting power from a European branded product – quality you can rely on
  • top quality for great starting performance and a long life
  • always the same size and capacity as the original battery
Description
Shipping & delivery
Product Questions

Starting power with the certainty of a European branded product.
It is supplied complete with vent tube and fixing screws.
Each battery is inspected and tested extensively before shipping.
The battery is supplied in a dry, pre-charged state. Please use the battery acid provided (fresh pack) for filling.
If the fluid level falls during use, top up using distilled water only (50020000250) – never use battery acid.
Before filling the battery, check that it fits your vehicle (snugness of fit, dimensions, type, location of the poles and vent) because batteries cannot be exchanged once filled.
Remove the vent caps before filling the batteries.
Pour in the acid and let it stand for about 30 minutes to enable the air to escape properly.
Replace the vent plugs for the intake openings, connect the vent tube, install the battery and start the engine. In this state, the battery is not at full power (about 70%), but it will enable the engine to be started a number of times without any problems.
The battery will achieve full power during the first trip, or beforehand if a compatible motorbike charger is used.

12 V, 19 Ah
Length x width x height = 186 x 82 x 171 mm
Terminals: positive on the right, negative on the left
Vent to the left


 

Advice for battery disposal and deposit

You may also be interested in the following product(s)