to the cart »

Interesting offers:

Hi-Q battery AGM MF YTX16-BS, 12V, 14 Ah, maintenance-free

Order ID 50010300450
NEW!
More Views

Hi-Q battery AGM MF YTX16-BS, 12V, 14 Ah, maintenance-free

Order ID 50010300450
  • 12 Volt starter battery for motorcycles, scooters, quad bikes, snowmobiles, riding mowers, etc
  • affordable price
  • delivered dry and charged – please, use only the enclosed battery acid
  • Absorbent Glass Mat (AGM): Electrolyte is bound in a fleece of fibreglass
  • delivered completely with connection screws
Description
Shipping & delivery
Product Questions

Polo Hi-Q Battery AGM MF YTX16-BS, 12Volt, 14Ah, maintenance-free

Maintenance-free 12 Volt starter battery for motorcycles, scooters, quad bikes, snowmobiles, riding mowers, etc .

Details:

  • the essential from over 30 years of experience of Polo
  • Purchasing high quantities directly at the leading manufacturers at the market ensures this affordable price 
  • VRLA (Valve Regulated Lead Acid) High-quality lead accumulator - every battery is examined and tested before delivery
  • VRLA-Batteries keep the voltage for a longer period of time and consequently require less recharging when in stand-by or storage mode
  • Absorbent Glass Mat (AGM): Electrolyte is bound in a fleece of fibreglass
  • as AGM with lower internal resistance and almost completely leak proof
  • delivered dry and charged – please, use only the enclosed battery acid
  • does not require any maintenance after filling, except recharge with an appropriate recharger after not being used for a longperiod of time  
  • delivered completely with connection screws

Start-up:

  • before filling the battery, please, check again if it suits your vehicle (fitting accuracy, dimensions, type, position of the poles and of ventilation) - an exchange of a filled battery is not possible
  • delivered dry and charged – please, use only the enclosed battery acid
  • remove the protective foil from the battery, remove the sealing strip of the battery from the acid, insert the acid and leave for approx. 30 minutes for the air can escape easily
  • The sealing strip ofn the acid pack, is now inserted into the openings of the battery and firmly closed
  • install the battery (it is recommended to use battery terminal grease to protect the terminals after the installation)
  • start the engine – in this state, the battery is not operating at full capacity ( approx. 70 %), but can be used for starting several times without problems
  • the full performance is reached at the first drive or in advance when using a suitable charger (at least with automatic switch-off)

Dimensions and capacity (approx.):
Length x Width x Height 150 x 87 x 161 mm
Length x Width without cap: 150 x 84 mm
Weight: 4.6 Kg
Connections:+ pole front left, - pole front right
screw connection possible at the front or from above
Ventilation: through a valve in the cap
12 Volt
14 Ah
Cold start capacity CCA: 230 A
Standard/maximum charging current: 1.4/7 A

Price per piece (acid included)

Advice for battery disposal and deposit

You may also be interested in the following product(s)