to the cart »

Interesting offers:

Hi-Q battery AGM MF YTX14-BS, 12Volt, 12Ah, maintenance-free

Order ID 500179
More Views

Hi-Q battery AGM MF YTX14-BS, 12Volt, 12Ah, maintenance-free

Order ID 500179
  • maintenance-free
  • 12 V, 12 Ah
  • length x width x height: 152 x 88 x 147 mm
  • terminals: positive on the left, negative on the right
  • battery acid included
Shipping & delivery
Product Questions

The essence of over 30 years’ experience in what matters.

This battery features a high quality and the low price is achieved through bulk buying.
It is supplied complete with fixing screws.
Each battery is inspected and tested extensively before shipping.
Before filling the battery, please check that it fits your vehicle (snugness of fit, dimensions, type, location of the poles and vent) because batteries cannot be exchanged once filled.
The battery is supplied in a dry, pre-charged state. Please use the battery acid provided for filling.
Remove the protective film from the battery and detach the battery sealing strip from the acid. Pour in the acid and let it stand for about 30 minutes to enable the air to escape properly.
Place the sealing strip from the acid into the openings on the battery and seal it firmly. Install the battery and start the engine. In this state, the battery is not at full power (about 70%), but it will enable the engine to be started a number of times without any problems.
The battery will achieve full power during the first trip, or beforehand if a compatible motorbike charger is used (at least with automatic switch-off).

12 V, 12 Ah
Length x width x height = 152 x 88 x 147 mm
Terminals: positive on the left, negative on the right


Advice for battery disposal and deposit


Write Your Own Review

Preis/Leiszung Top
Review by GSX1400 - Fahrer
Einbau im Frühsommer 2012. Erster Winter ohne Probleme überstanden. Maschine sprang sofort an. Für dieses Geld allemal gut genug. (Posted on 3/29/2013)
Review by biohazard
Ich habe die Batterie heute gekauft & eingebaut. Bike läuft einwandfrei. Hier mal ein paar Eckdaten:

- Ich habe die Batterie bei Polo in Kiel gekauft: Volle 5 Sterne für den Service. Präzise Fehleranalyse, freundliche Beratung und optimale Produktempfehlung.

- Technisches:

1. Ruhespannung nach Einfüllen des mitgelieferten Säurepacks: 12,80 V

2. Ladespannung im Leerlauf: 13,97 V

3. Belastungsspannung bei 3000 rpm: 13,67 V

Ruhespannung stimmt. Die Punkte 2 + 3 sind Abhängig von Lima & Regler des Moppeds und liegen bei meiner Maschine genau im grünen Bereich.

Fazit: Perfekt, 5 Sterne :) (Posted on 4/30/2011)