For blowing and cleaning (e.g. spark plug holes before the spark plug is removed, electronic components) if no compressor is currently available.
WIKO COMPRESSED-AIR SPRAY – flammable – consists of a flammable propellant for cleaning under pressure.
The spray is used wherever dust and light stains are difficult to remove using traditional methods.
The dry, contact-free cleaning process under pressure means that the spray is also ideal for sensitive surfaces.
dry and contact-free cleaning under pressure
outstanding suitability for sensitive surfaces
easy to use
Areas of use:
cleaning hard-to-reach places and corners such as seams, cracks, joints or gaps
highly sensitive surfaces
hi-fi, CD and DVD devices, modules, circuit boards, magnetic heads, disc drivers, etc.
optics: cameras, lenses, etc.
computer keyboards and housings, electronic components
medical and measuring equipment
Conditions for use:
Hold the spray can upright!
Do not tilt by more than 30°.
Aim the spray nozzle at the parts to be cleaned and spray, leaving short intervals, until no more dirt or dust can be seen.
Electronic devices must be switched off before cleaning.
Extremely flammable aerosol
Pressurized container: may burst if heated
Keep out of reach of children.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Dispose of contents/container in accordance with local/regional/national/international regulations.